La Conga Excellence and Excellence 990 were the robots of the year 2017. The guys from Cecotec managed to make a range of robot vacuum cleaners with great success, thanks to its 4 functions in a single device and its extraordinary suction power. Now, with the Conga 3090, have been proposed take a technological leap, launching the most modern, complete and equipped robot on the market.
Discover in this analysis why thousands of people are already enjoying this complete and modern robot vacuum cleaner.
Conga 309 series0 | |
Navigation technology | Laser with room mapping |
Autonomy (min) | 110 |
Noise (decibels) | <64 |
Diameter (cm) | 34,0 |
Height (cm) | 9,6 |
Weight (kg) | 3,3 |
Charging time (hours) | 3-4 |
HEPA filter | Yes |
Programmable | Yes |
Dry/wet deposits (ml) | 600/170 |
Speeds | 3 |
Suction Power (Pa) | 2.000 |
Cleaning modes | 10 |
Assessment | 96 |
And if you want to find some of the best prices on the web, visit our new offers section.
Currently, la Conga 3090 is discontinued. Therefore, if you like this robot, we invite you to discover other models of the brand, such as the best-seller Conga 4090, the very powerful Conga 6090 or the current top of the range, the Conga 7090 A.I, with artificial intelligence and a friendlier app.
The Conga Excellence and Excellence 990 are a success story. The Spanish company Cecotec has placed its robots among the best sellers on the market in recent years, thanks to the combination of excellent performance and a very reasonable price..
In this way, we can say that the bar is very high: robots that sweep, vacuum, mop and scrub, 1.200 Pascals of suction power climb carpets up to 2 centimeters thick (many robots have problems with this), ExtraPower Suction Pro, for a deeper cleaning, lithium battery with a long autonomy, silent...
(Almost) you couldn't ask for more. However, Cecotec wanted to give the concept a twist.
If you have any questions, visit our section FAQ – frequently asked questions, or leave us a comment at the end of the article, in the most complete forum on the Internet. We will respond to you as soon as possible.
Table of contents (click to show/hide)
Conga 3090 series: valuation
La Conga Series 3090 obtains a rating of 96 points out of 100. It is a device that maintains some of the strong points of its predecessors: 4 in 1, powerful, quiet, HEPA filtering... But, In addition, the new Cecotec robot incorporates the most modern technologies to achieve greater efficiency and deeper cleaning of your home.r. It is also possible that you can see it as Conga 3091 or Conga 3092, depending on where you buy it. It is the same model, it simply changes due to distribution criteria.
What are the improvements of the Conga series 3090
Laser navigation: The new Conga It has the most advanced room mapping system, thanks to its laser navigation. The powerful laser Conga 3090 reaches almost 8 meters of action radius. In this way, cleaning is optimized, since the robot has great precision in its mapping system, and knows where it has passed or where it should or should not go, since Zones can be delimited or excluded through the interactive application. Additionally, navigation is predictive, so the 3090 navigates objects more easily and has neater, smoother navigation. Thus achieves greater cleaning, since no corner is left uncleaned, and greater efficiency, because the robot finishes its task in less time.
Turbo Clean Carpet Technology: Get one even deeper cleaning of carpets and rugs, optimizing the power level when it detects that it is on one of these surfaces. In addition, it is capable of climbing carpets up to 20 millimeters thick.
Power: Cecotec incorporates even more power. From the notable 1.200 Pascals of Excellence, we move on to nothing more and nothing less than 2.000 Pascals in the new Conga Series 3090, leading in this section, along with the hitherto unbeatable Xiaomi Vacuum 2 Roborock.
Battery: Its lithium battery without memory effect provides an autonomy of 110 minutes, which, together with its intelligent navigation system, allows you to clean a large surface with a single charge. And if it doesn't finish, no problem, because thanks to its Unlimited Cleaning technology, the robot remembers where it has finished and knows where it should continue.
Scrubbing: Even more improved. If we already loved the Excellence and the Excellence 990 for their scrubbing system, the new Conga has perfected the process, thanks to its smart drip system, which provides just the right amount of water for optimal scrubbing and its laser navigation system. United with his Twin Floor mop, with two finishes of different roughness, and its great suction power, the floors will be even cleaner and shiny. And if we add to this the new Scrubbing mode, which we discuss later, the result is simply fantastic.
Box contents
Operation of the Conga series 3090
As usual, It is advisable to charge the robot for about 12 hours before using it for the first time. (afterwards, it will take about 3-4 hours). This recommendation can be extended even to the first charging cycles. The charging base must be supported on the wall, with a recommended space of 1,5 meters forward and 0,5 meters on each side, to allow the robot to maneuver comfortably and adequately detect where the base is (however, it is not essential that there is all that space; in our case, for example, there is a little more than half and the robot maneuvers perfectly).
In the first days, it is advisable to put the robot to work in Eco mode, to make the most of the battery when going around the house. This way, you will make a complete map of the house sooner, and we can start getting the most out of it sooner. In those first days, you have to let the Conga freedom for her to navigate, to complete the map on her own, without manually sending her home. In this way, it will scan every square meter of the home with its laser, and will have a complete view of the home..
In these first hours of operation, the Conga It will carry out various reconnaissance tours, creating the map of the home from different angles, thanks to its iTech Laser system. After going through the house several times, the robot will have identified each corner and drawn the map with great precision, and will proceed to save it automatically. At this point, once the map is saved, you can now make full use of the possibilities offered by the Conga 3090 through the app.
The robot navigates intelligently. Its new sensors provide orderly, fluid and smooth navigation, and it climbs the carpets nimbly.. The incorporation of laser mapping is noticeable, both when moving and when avoiding obstacles. The system performs a 360º recognition by projecting a beam of light at a distance of 6 to 8 meters, mapping even the smallest detail. This way, it detects where walls and furniture are, making the most efficient route through the home.
As is common in most robots, the Conga Series 3090 has a button on the top that is used to start or stop the robot. Now, the news is that The robot is manageable through the app, compatible with iOS and Android, which provides greater comfort and versatility, since we can access a multitude of functions and information from it. It is also possible to operate it through the remote control, as traditionally, although from this you will not have access to all the functions that the robot provides you.
Additionally, with new software updates, the Conga 3090 is compatible with voice command systems, so it can be controlled by Alexa and Google Assistant. More comfort, impossible.
The new Conga Series 3090 has a long side brush, which collects dirt towards the center, where the rotating central brush—made of two materials, bristles and silicone, which greatly increases its effectiveness— and its extremely high suction power do the rest of the work, to trap all the particles and dust inside its large tank, which now has 600 milliliters of capacity (twice as much as Conga Excellence), from which it does not escape, thanks to its HEPA filtering system.
Detail of the new rotating central brush
Dirt concentrated by the power of the 3090
By supuesto, Conga Series 3090 is programmable. The possibility of programming the robot is very convenient, since you can indicate the days and times at which you want the robot to do its work (for example, when you are not at home), and this way you will always have your home clean. You can do it from the remote control or through the application.
Maintenance of the Conga 3090
Removing the brushes for cleaning and maintenance is very simple, and should be done periodically.
To remove the central brush, simply press the release button. It can then be cleaned with the tools it comes with, and it can be washed with soap and water if necessary. To remove the side brush, simply pull it out.
For its part, the tank is also easy to remove and empty. Simply lift the lid, which is magnetically attached, and remove it. By lifting the tank lid, the HEPA filter is removed, so that it can also be cleaned with a brush. The HEPA filter is not washable.
If you need spare parts, you can find them on the official website.
Conga, the robot that scrubs
The range Conga Cecotec stands out from the competition, among other things, for its scrubbing capacity, something that few brands still incorporate. And of course the new Conga 3090 series too It is a 4-in-1 robot, which sweeps, vacuums, mops and scrubs.
If only the mop is used (for example, on wooden floors), the result is fantastic. The robot will vacuum and at the same time pass the microfiber cloth over the floor, leaving it brighter. If you apply a little cleaning spray or shine to the mop, your parquet will look spectacular.
The scrubbing function is one of the aspects that we liked the most in the Conga Excellence 990. There are still not many robots that have this useful function, and in some of those that include it it is not fully perfected, and may leave a small puddle if, for some reason, they get stuck (for example, if they are held by the legs of a table or chair).
However, from the beginning we observe that the robots Conga They scrub well. and this new Conga Series 3090 also does a good job, and with the advantages that laser navigation provides, it allows you to do your job more effectively and efficiently..
Scrubbing, the perfected scrubbing system
Thanks to its new Scrubbing mode, the robot is capable of imitating the movement that humans make when scrubbing, achieving an excellent finish and removing embedded dirt.
The robot makes a back-and-forth movement, back and forth, in the shape of a palm tree. In this way, it goes over each spot several times, like people do when mopping, obtaining a better result (to which its new mop, with two different roughnesses, also contributes).
Watch how he does it in the video.
To scrub, you must fill the water tank included, which has a capacity of 170-180 milliliters. Next, the robot starts up, and you can see that the mop presses lightly on the floor. The water dosing system implemented by Cecotec works very well, and in the 3090 series it has even been perfected. The robot doses the water perfectly, without flooding (as sometimes happens with other brands), leaving the soil slightly moist. Thanks to its new two-material mop, superior cleaning is also achieved.
If we add a little non-foam floor cleaner to the water (very little, just a few drops), we must bear in mind that the tank only has 0,17 liters of capacity, much less than a bucket, and an excess of product could clog the filters), we will have an impeccable, clean and scented home. Another tip is to lightly moisten the mop before starting scrubbing, to achieve a more uniform soaking from the beginning.
El Conga 3090, unlike some competing robots, can mop and vacuum at the same time, since the liquid tank does not hinder the entry of solids.
It is possible to combine the scrubbing mode with other functionalities, such as cleaning areas and delimiting restricted areas. In this way, it will be possible, for example, to tell him to only scrub the kitchen, or to establish a rug as a restricted area, so that he does not climb on it when he is scrubbing.
In order to do this, You have to enter the cleaning mode selection menu, and choose “zone” or “restricted zone”, depending on what we want to do.. On the map, a small switch button will appear at the top right, which by default will be off. If we activate it, we will enter scrubbing mode, so that we can combine it with the delimitation of areas.
Cleaning modes
The new Conga Series 3090 has 10 cleaning modes, so you can choose the one that best suits you:
Automatic mode is the default mode, and the most suitable in most cases. You simply have to press the button on the top of the robot, or in the app, and the robot will do the cleaning automatically, now with the advantages provided by laser navigation with room mapping: The Conga It will go through the entire home, cleaning it thoroughly and leaving no corners, in an orderly, intelligent and precise way, and when it is finished (or it is running out of battery) it will return to the base by itself.
Spot mode: By selecting this mode from the application, We choose a specific area, about 2x2 meters, that the robot will clean exhaustively, to achieve a perfect finish.
Edges mode: Dirt usually accumulates on edges and corners, that's why all the robots Conga They have this mode, which allows them to focus on those areas.
Deep Cleaning mode performs several passes in the same area, to remove the most stubborn dirt.
Area mode: We can delimit an area in which we want the robot to do a more thorough cleaning (for example, a rug, a high-traffic area...
Restricted areas: We can also mark areas that we want the robot to avoid (for example, our pet's food area, the baby's room, etc.
Spiral mode: A classic; if activated, the robot will spiral around the activation point. Ideal if we have dropped something and it has scattered.
Scrubbing Mode: One of the novelties that this robot presents. Scrubbing imitates the way people scrub, making a back-and-forth movement that causes them to pass over the same place more than once, as if they were the leaves of a palm tree., so that a perfect finish is achieved.
Back home: This mode activates automatically when the robot finishes cleaning or is running out of battery, but it can also be started manually.
Manual mode: If we want to clean a specific area at a time.
App Conga 3090 Series, packed with benefits
With this Conga, Cecotec begins a new era, and this must also be noted in the handling and control we have over the robot. The app Conga S3090 offers many possibilities to users:
Manage the robot in a simple and intuitive way: We are all used to using applications through our smartphone, and now, We can control the robot to start it from anywhere we are, choose a special mode, program it, send the robot to clean a specific area of the house, etc.
Mapping of rooms: Visually, We can see the work the robot has done on a map of our home, the time it has worked and the area it has cleaned. You can also delimit areas that we do not want the robot to clean, for some reason.
Scheduled: Of course, we can do the programming from the smartphone, so that the Conga clean for us even if we are not there, on the days we indicate.
History: If we want review cleaning operations done in the past, we can do it.
Setting up the Wi-Fi connection with the robot is very simple. Once the application is installed, it guides us step by step: First, we press laser+home on the robot for 3 seconds, until it flashes; A screen will appear in which we have to choose the Wifi network (we will choose the normal one, which is compatible with this type of device, not 5G), and we enter the password. Next, it takes us to another screen, where we click the button to go to Wifi settings, where we choose the network CongaLaser_XXXXXX, and the mobile will connect to the robot.
When choosing the Wi-Fi for our home, It is very important to choose the 2,4 Ghz network, and not the 5 Ghz one (which normally will say 5G). If not, it won't work.
The 2,4 GHz network allows a greater range, so it is ideal, even if the home is large or there are obstacles. For this reason, it is chosen for this type of device to operate.
Wifi is only necessary so that you can give orders to the robot from the application. You can control it remotely from your smartphone, with any connection (from the street, from work, from a bar...), the one that has to be connected to your home's Wi-Fi is the robot.
You can consult the video corresponding to your phone, Android or iOS, to see how to configure Wi-Fi step by step.
Within the application, it is also possible to configure some functions of the robot. To do this, go to Profile-Robots, and there click on the arrow to the right of the robot image.
On the next screen, we can configure issues such as turbo mode on carpets, or map memorization (which will be necessary to perform some functions, such as selecting restricted areas, for example). You can also restart the map (for example, if we go to another house), and see the firmware version.
The robot updates the firmware when an update is available (the application itself notifies that there is an update, and requests that the robot be placed on the charging base while it is being updated).
Advantages of Conga 3090
It is a Conga
Cecotec has shown that it knows how to make good robot vacuum cleaners. Its great success is not accidental, but is due to the extraordinary quality-price relationship that always accompanies the products of the Spanish company.
4 in 1 robot
It not only vacuums, but sweeps, mops and scrubs. All these possibilities make the Conga 3090 series in contender for robot of the year and, without a doubt, one of the best options on the market for those who are thinking of buying a robot vacuum cleaner.
Smart navigation
This Conga has jumped on the bandwagon of the latest navigation technologies. Its Wi-Fi connection to an app and its laser navigation with room mapping put this robot at the forefront of the sector., to achieve a thorough cleaning of the entire home.
Powerful
Powerful: Your 3 power levels and 2.000 Pascals of suction power They place it at the top of the ranking of robot vacuum cleaners. Furthermore, thanks to the large wheels on it, it is capable of climbing carpets up to 2 centimeters high, which many of the robots on the market have problems with.
Interactive cleaning
You can define exactly what you want to clean and how.o, select cleaning areas, restricted areas that you do not want to clean, or clean a specific area.
Cleaning in several stages
El Conga Series 3090 returns to its charging base when you need it, but if you're not done, recharges and starts cleaning where it left off, to ensure that it cleans 100% of the surface, so the size of the home is not a problem.
Silent
Its less than 64 decibels will not bother you or your neighbors, You can calmly do other tasks while the robot works.
High efficiency filtering
La Conga 3090 has a HEPA filtration system that traps microparticles of dust and mites that the robot absorbs, preventing them from re-entering the atmosphere, leaving purer air.
Drawbacks
It is very difficult to fault this robot. With impeccable operation and very simple handling, only its price can be considered a problem for some pockets, although, without a doubt, it is a worthwhile investment.
The biggest drawback it may have is that, due to its laser turret, its height (9,6 centimeters) is slightly higher than that of other robots, so if you have furniture with a lower height, you should take this into account. Some users also comment that the battery life could be longer. However, it must be taken into account that the robot knows where it is, what it has cleaned and what it still needs to clean; This way, if it doesn't finish, it will load again and restart the cleaning where it ended, so this doesn't pose a major problem.
Opinions on the Conga 3090
It has a ton of modes to choose from, and three power levels, and you can tell it where to clean and where not to clean. Plus, mopping leaves the floor super clean. And the best is laser mapping.
I am very happy, it is the best purchase. It has no problems with obstacles, it is one of the best appliances there is.
Wonderful, it's luxurious. It works very well, and the mapping on the mobile is very good, so you can see what has been cleaned and what is missing.
One pass, it has great suction power, it cleans the entire house without leaving even a corner. The application works great and provides you with a lot of information. Totally recommended.
We are delighted, you couldn't ask for more. It works perfectly, and does what was promised. At first it was a little difficult for us to use the app, but once you get the hang of it it's very easy.
A great robot, better than the Xiaomi and not to mention the Roombas. Nothing resists it, it sucks like an industrial vacuum cleaner.
Guarantee
The Spanish robot Conga Series 3090 has a 2-year warranty, and naturally has technical service here and in our language, which is an advantage over other competing robots of Chinese origin.
Why buy one Conga series 3090
If you are looking for a robot with intelligent navigation, laser mapping, robust, reliable, that does its job very well, and manufactured by the leading brand in the sector in our country, this is a great option.
If you would like to buy a Spanish robot vacuum cleaner, but you do not want to give up the latest advances and the most cutting-edge technology of the moment, and all of this, at an exceptional price, the Conga Series 3090 is a great alternative.
In this section, we compile some of the most common questions asked by users and potential buyers of this robot, in addition to others that readers have sent us. If you have any other questions, you can send them to us through the comments below.
Most common questions and answers
How can you do the Conga all 4 functions at the same time?
Unlike other robots, the mop Conga does not cover the central hole, so you can mop and scrub, at the same time sweeping with its side brush and sucking through the central hole, where the roller is located.
I have seen the model in a store Conga 3092. What are the differences between the Conga 3090 and the Conga 3092?
La Conga 3090 and the Conga 3092 are the same model. As with some Roomba models, which vary in the last digit, the device is the same, it is simply a differentiation that the brand makes based on the sales channel through which they are distributed.
Is it suitable for all types of floors?
Yes, the Conga 3090 works on all types of soils, both porcelain and wooden, synthetic, as well as rugs and carpets; logically, always indoors.
What happens if the robot's autonomy is not enough to clean the entire house?
No problem, the robot will charge to the base and resume cleaning from the place where it left off, until 100% of the cleaning is completed, thanks to its Unlimited Cleaning technology. The robot itself will decide when to return to the charging base, depending on the surface it has left to clean and the mode in which it is operating.
What does the Conga 3090 in carpet cleaning?
La Conga 3090 It is capable of climbing carpets up to 20 millimeters thick, which other robots have problems with, or are simply incapable of. Besides, Automatically activates Turbo mode when detecting a carpet, so that it achieves great cleaning efficiency.
Does it fit well under furniture?
Unlike other robots, which have problems in this regard and avoid getting under some furniture, la Conga 3090 does it perfectly, as long as the height is enough (due to the laser turret, it reaches 9,6 centimeters in height).
What happens if I'm not at home and the robot gets stuck? Is there a danger of the engine burning out?
It is not usual for the Conga 3090 gets stuck, because its advanced navigation system and the wide range of the wheels prevent this (until now, it has never happened to us). However, if this were to happen, the robot would stop, so there is no such danger.
What are the characteristics of the HEPA filter?
The HEPA filter of the Conga 3090 retains up to 99,97% of dust and mite microparticles, leaving a purer environment. It is not washable, you have to clean it with the included brush and check it periodically for replacement.
How often do you have to change the robot's spare parts?
Logically, it depends on the use given to it. According to the manufacturer, as a guide, the side brush should be changed every 3 months and the HEPA filter every 6 months, although in practice, the periods may be longer.
Is it valid for homes with animals?
Yes, Thanks to its great suction power and its new rotating bristle and silicone brush, it collects hair with great efficiency. In addition, its HEPA filter prevents dirt from escaping outside, and since it is quite silent (less than 64 decibels), it does not bother animals or people.
I don't like it beeping, can the beeping be turned off?
Yes, in profile-robots there is an option that provides voice, in which you can regulate the volume of the robot, or deactivate the sounds.
The robot is lost, I don't know where it is, how can I locate it?
Entering the app, there is a button shaped like a crosshair, at the top right. If you click on it, the robot will beep and you can locate it.
Does it have automatic dirt detection?
No, it does not have one, although if you want a greater cleaning, in addition to the turbo power level, you can also activate the X2 mode, which will make a double pass through each site, for an even more thorough cleaning.
Do you have problems with dark carpets?
No, unlike what happens with some models from other brands, no problems have been found on this type of surface.
Can the name be changed? Conga 3090 in the app?
Many people like to name their robot, and this has been taken into account by the application's programmers. Therefore, the answer is yes you can.
To do this, you have to go to Profile-Robots and click on the arrow that appears on the right, so that you enter "Robot Settings". In this section, the name of the robot appears first. By clicking there, you can edit and add whatever you want, then saving it in the floppy disk-shaped button that appears in the upper right corner.
What is the night mode that the app includes for?
Night mode, when activated, prevents the robot from operating between 22:00 p.m. and 7:00 a.m.
Mapped
Do you save the mapping or do it again every cleaning cycle?
Once the robot has toured the house and mapped from various angles, the map will be saved, making it possible to use the map to access certain functions, such as cleaning zones or restricted areas. Memorizing the mapping is an option that can be configured in the app, in robots-profile.
Do I have to do anything special for it to map? What is the best way to do a mapping?
The robot will carry out the mapping the first time or times it circulates around the house, and will save it. In robots-profile, the memorized map option must be checked.
An easy and quick way to do the mapping is to put the robot in edge mode (so that it will go around the walls and draw the profile of the rooms) and in Eco mode, so that the battery lasts longer., and make sure it finishes running around the house on a single charge.
Can I establish cleaning zones, or restricted areas, that the robot will not access?
Yes, they are two of the functionalities that can be accessed from the application, once the robot has mapped the house and saved the map.
How big are the zones and restricted areas? Can I configure it?
In both cases, the size is configurable. When you enter one of these options and press + to add, a box with an approximate size of 2x2 meters appears. By dragging along a corner, you can make it larger or smaller, and give it a square or rectangular shape. The area will also have an X, to eliminate it if desired.
In the case of restricted areas, you can even select a very small area, which can be interesting to, for example, prevent entry to a pet's food area.
Are there functions that require the map to be already saved?
Yes, functions such as zone clearing or restricted zones require the map to be already saved so we can define those areas.
I have a house with 2 floors. What should I consider?
La CongaAs usual, it has anti-fall sensors, so you avoid falling down the stairs.
Moreover, Currently, the application only saves one map, although this function may be implemented in future versions. The same can be applied if you want to use the robot in two different houses, currently you can only save the map of one of them.
In any case, there is no problem in using the robot in homes with two floors, or in two different houses, it is simply that we will not be able to have some functions (such as cleaning areas, or restricted areas) in the one in which We don't have a saved map.
What can I do if the map doesn't work for me or the robot duplicates the map?
In both cases, it is best to go to profile-robots and restart the map, to build it again.
Is there any element that could affect the navigation of the Conga 3090?
As with any robot, it is best to clear the cleaning area as much as possible, to make your work as easy as possible. In general, we have not detected problems with cables or fringes on the carpets, or with curtains.
We have also not seen problems with black carpets, as happens in some models from other brands.
Yes, it could be affected in some cases by its laser navigation system (and as happens to other robots with this technology) in rooms where it receives full, direct sunlight, or if there are mirrors, which can be interpreted as the room being prolonged.
Mopping and scrubbing
Can the mop be used on any type of floor?
If used dry, it is valid for all types of floors (although on carpets, it may not be the most suitable). If it is used when wet, care must be taken to limit access to the carpets, so that it does not get them wet, and prevent it from returning to the charging base., so that it does not cause any problems with humidity.
Can you prevent him from climbing on a carpet when you are scrubbing?
Yes, it can be done through restricted areas, defining on the map that you cannot access the area where the carpet is.
Can it be programmed to scrub?
Yes, It can be programmed to mop in automatic mode, but always taking into account the precaution that the robot with the wet mop cannot go to the charging base or be on it. Therefore, the robot should not start from the base (since it will have water) and we should place the charging base in a place where the robot does not have access (for example, on a table), since when it has the low battery, it will try to charge.
Can the robot be charged with the water tank on?
No, humidity could damage the charging base.
Can the water tank be refilled when it is placed on the robot?
No, it must be filled when it is not in the robot, since we could accidentally wet the robot and cause a problem.
Does the tank have to be emptied when you have finished scrubbing?
Yes, it is advisable to do so.
Should I use Scrubbing mode to scrub?
It is not mandatory, the Scrubbing mode imitates human movement, passing through the same place several times, in a back-and-forth manner, making it more effective. But in any case, if you put the water tank with the mop and use any other cleaning mode, the mopping robot will also mop as it goes.
Can scrubbing be combined with any other function?
Yes, scrubbing is compatible with the use of zone cleaning and restricted areas. To do this, we would enter these modes, and press a small button that appears on the map, at the top right, which by default will be in off, to put it in on (we get a pop-up window, indicating that it is put into scrubbing mode).
Can any cleaning product be used mixed with water to scrub?
Yes, You can use a non-corrosive, non-foam floor cleaner., in a proportion of one part for every 10 of water.
How many square meters does it scrub? What happens when you run out of water?
Even though your deposit is not very big, Its excellent dosing system, which moistens, but does not pool, achieves excellent performance, and is very useful..
The square meters depend a little on the type of floor and the shape of the room and the obstacles there may be, but, as an example, scrubbing about 20 square meters will leave you with a little more than half of the tank. The total autonomy can reach 50-60 square meters, much higher than that of other robots.
If the water runs out, simply mop it.. If it has not finished, you can stop the robot, remove the tank and refill it (it is not advisable to fill the tank while it is on the robot, since we could damage it), and put it back on to resume scrubbing.
Can you scrub puddles or accumulated water?
It is not recommended The water that the robot uses must be what is in the tank, it should not be used to collect water that is on the ground, as it could be damaged.
Can you overcome obstacles with the scrubbing tank? What about carpets?
La Conga 3090 can overcome obstacles of up to 2 centimeters in general, and up to 1 centimeter when the water tank is on. When scrubbing, it is advisable to remove the rugs, since they could climb on them and wet them, or establish them as restricted areas.
Can you mop wooden floors?
La Conga 3090 performs a very measured, light dosage; The mop moistens, not soaks, so There should be no problem in the case of varnished pallets. If instead of wood, it is synthetic, there should be no problems either., since they usually have a certain resistance to humidity, and can even be water-repellent (this can be verified in the manufacturer's or distributor's specifications). In any case, This is a general conclusion, it depends on the porosity of the soil, it depends on whether it is well sealed or not.
Is it capable of cleaning stains on the floor?
Thanks to its new two-groove mop and Scrubbing mode, the Conga 3090 is capable of cleaning some stains. However, although its capacity in this regard is superior to that of other robots, if the stain is very attached, it may not be able to do so.
Can the mop be washed in the washing machine?
Yes, you can wash the mop in the washing machine, at a maximum temperature of 30º.
What type of water should be used for scrubbing?
In principle, tap water is used, at room temperature.. In homes where the water has a lot of lime, it may be advisable to use filtered water, to avoid accumulations. The robot includes some replacement filters (small white filters), which can be used to change the ones it comes with if they become clogged. It also has a small spike, which can be used to lightly puncture the filters, thus unclogging them.. If you need more replacement filters, they can be requested through Cecotec customer service.
Management of the robot, app and Wifi
Can the robot be controlled from anywhere or does it need to be connected to Wi-Fi?
Wifi is necessary for the robot to have access to the Internet, but you can manage it remotely through the app from anywhere, as long as your mobile phone has a connection to the Internet.
If I turn off Wi-Fi and turn it back on, do I have to configure the robot connection again?
No, once the router reboots, the robot will connect in a while. If you enter the robots-profile, it will say “offline” while you have not logged in, and “online” when you have already logged in.
Is Wifi essential to operate the robot?
No, la Conga It can also be operated using the buttons on the top of the robot, or through the remote control. However, it is through the application that you can get the most out of the 3090., because there are functions that are only accessible through the app.
I am not able to connect the app with the robot.
The first thing to keep in mind is that it is not compatible with 5 GHz networks, you have to choose 2,4 GHz Wi-Fi. This has been designed this way because the latter has a greater range. Additionally, when configuring the connection, the robot should not be far from the router. In the videos you can see how to configure it to Android and to iOS.
Is the app updateable?
Yes, Notices automatically arrive when there is a new version of the firmware, informing that it is going to be updated, to incorporate improvements or correct improvable aspects that may exist, based on the feedback received from users.
Is it possible to know what the application updates include? Is it always necessary to update?
Yes, it is good to update the app, since as with any software that is updated by the manufacturer, updates include problem corrections and improvements; among other issues:
1. They optimize the efficiency and autonomy of the battery to last longer.
2. They improve intelligence and navigation parameters, optimizing home cleaning.
3. They correct bugs and install improvements in connectivity, device compatibility with Wi-Fi, etc.
4. They provide access to exclusive features, firmware updates and the latest news and, ultimately, allow you to get the most out of your robot vacuum cleaner.
Can the robot be controlled from more than one mobile phone?
Yes, You can install the application and link the robot to more than one smartphone, although you cannot operate the robot at the same time from both phones., in one of them a notice will appear that the robot is being managed by the other user.
What functions does the remote control include?
The controller allows convenient access to operating the robot, but with limited functionality, it can be program, start and pause, choose the power level and activate spiral and edge modes, as well as manual mode, and send the robot to the charging base.
Can it be controlled by voice commands?
Yes, in an update of the robot's firmware, this possibility has been included, so that the Conga 3090 is manageable by voice commands, through Alexa and Google Assistant.
Charge and autonomy
How much space do I have to leave for the charging base?
The brand recommends 0,5 meters on each side and 1,5 meters forward, although it is not essential that there be so much space.
Where should the charging base be located?
The ideal, apart from leaving the space mentioned in the previous question, is for it to be in a place as central to the house as possible, so that you can easily detect the base wherever it is.
Does it always return to base? If it doesn't, what could be the reason?
In general, this robot will always return to the base by itself when it detects that its battery is low.. If it does not, it may be that there has been an error in one of its sensors (for example, the sun has hit it in front of it, a mirror has confused it, a wheel has gotten stuck) or that, for some reason, it does not detect the charging base well. It could also be that we have moved the robot by carrying it in our hands, and that this has disoriented it in relation to its location.
When you are going to charge, you move the charging base and sometimes it doesn't charge well. What I can do?
The charging base must be supported firmly on the wall or similar location.. However, if it still moves, we recommend fixing it to the floor or wall with double-sided tape. It is also advisable to periodically clean the terminals of the robot and those of the base, with a clean cloth, to guarantee maximum charging effectiveness.
How long does it take to charge? How do I know it is charging?
The charging time is 3-4 hours, although the first time it is advisable to leave it charging for about 12 hours. While charging, the robot's light flashes yellow-orange, while when it is already charged, it remains solid blue. You can also see if it is charging or if the battery is full through the app. After 5 minutes of inactivity, the Conga 3090 will go into suspension.
Does it always have to be on the charging base when not cleaning? Can't it break down or consume a lot of electricity?
Yes, As a general rule, it is recommended that this be so. However, if it is not going to be used for a long period (for example, 3-4 weeks), it is recommended to disconnect the charging base and even remove the battery, which in the Conga 3090 can be done in a simple way, as seen in This Video. In any case, it is recommended that the battery be charged at least once a month.
Regarding electricity consumption, both this and other robot vacuum cleaners have very low consumption, so the cost is minimal.
If the robot is not in the base or it is not plugged in, it will discharge little by little.
What is your autonomy?
The autonomy depends on the power used, the carpets you have (since it will use maximum power in them) and the obstacles that may exist. The maximum autonomy, in ECO mode (where it develops 1.000 Pascals of suction power) is 110 minutes. Besides, the Conga 3090 has Normal mode (1.400 Pascals) and Turbo mode (2.000 Pascals), in which, logically, the autonomy is less.
In any case, it must be taken into account that, with Unlimited Cleaning technology, the robot will resume cleaning where it finished, so it is not limited by the battery, like other robots.
Programming Languages
How is it programmed?
It can be programmed using the remote control or through the app, in both cases in a simple way (you can see the videos in this analysis, above).
When programming, can I choose modes or other options?
No, at least currently. When programmed, the robot goes out to clean in AUTO, and with the normal power level (perhaps this type of issue will be included in future versions, although it is not certain).
Maintenance
How often do you have to change the brushes and filters?
According to the manufacturer, the side brush should be changed every three months, and the HEPA filter every six months. In our opinion, these are very prudent times, both things can last much longer if they are properly cared for, as we explain in the next question.
What maintenance needs to be done on the robot?
At each cleaning or, at least, when the tank is emptied (which will normally last several cleaning cycles, because it is quite large), The central brush and side brush must be cleaned of hair, threads and other elements that may have become tangled.. It is very important for its conservation and the proper functioning of the robot, since if not, the brushes may not rotate correctly or twist their hairs, leaving them in poor operating condition.
Both brushes can (and should) be removed from the robot, for easier and more complete cleaning.
When emptying the tank, it is advisable to take the opportunity to clean the HEPA filter with the brush, so that its cleanliness and thus its proper functioning are guaranteed.
On the other hand, also Drop sensors should be cleaned periodically (especially if we have a home with stairs or holes through which you can fall) and shock, to ensure proper functioning of the robot, with a clean, dry cloth.
Likewise, the wheels must also be cleaned of any possible dirt that may remain adhered.
Can the HEPA filter get wet?
No, the HEPA filter is not washable, so it is not advisable to get it wet, as it could lose its properties.
Cecotec, cutting-edge technology to clean your home
The Spanish company has been working since 1995 to offer a wide range of household appliances with the best quality-price ratio.
The sustained growth of its sales, supported by the good quality of its products and the word of mouth of satisfied customers, many of whom repeat with the brand, has allowed it to position itself as the leader in the vacuum cleaner market in Spain. The well-deserved success of its range Conga has led him to lead sales on the Amazon portal for months.
Now The company continues to evolve and improve. It is not only about giving the best quality-price, but also about offering the best products on the market..
And that is what he has done with the presentation on September 26, present a new era with his Conga 3090, and with many other products, such as the impressive Power Matic-Ccino 8000 Touch coffee maker, with 19 bars of pressure, or the impressive Mambo food processor, with 23 functions, 3,3 liter stainless steel jug, digital display, 10 temperature levels and capable of kneading up to 2,5 kilograms of dough, thanks to its powerful 1.700 watt motor. A robot with which Cecotec follows the same strategy as in robot vacuum cleaners, offering more features than the traditional market leaders (in this case, Thermomix), for a much more reasonable price.
If you want to know more about other products from the brand, you can visit our articles:
Hello, Jordi, thank you for coming to our website.
To remove the small front wheel, you have to insert a thin screwdriver using leverage, more or less through the central part of the wheel (it comes out easily).
All the best
Hello, my small front wheel broke. The plastic part that goes with the shaft broke and the shaft remained inside.
I bought a complete replacement but I don't know how to change it. Does the robot have to be disassembled or does it come out if I stretch the shaft?
Thank you very much!
Hello! Have you been able to change it? Could you tell me where you bought the piece? The same thing happened to me and I don't know how to do it, thanks in advance
Ok, thanks for informing us, M. Luisa.
All the best
Hello, María Luisa, thank you for visiting us.
Please check that the water tank has the high-efficiency filter and that it is correctly positioned.
On the other hand, try restarting the session (by entering your profile, at the top left you have an arrow with which you close the session).
All the best
Solved, thank you!
Good afternoon, this morning I cleaned a room and then I thought I would scrub it too. When I put the tank with the mop, there was no way to use the APP, the screen was “inactive”. I restarted the router and nothing, it tells me that there is no connection... What can I do? Thank you.
Hello, Alberto, thank you for visiting our website.
As for the map, it is possible that the robot does not initially save it even if it has visited the entire house, and may require more than one tour to estimate it from different angles and get a complete idea of the home plan. Did you have the latest version of the app? Normally, the latter works better, and in fact, we haven't had any problems with the map for a long time. Regarding the different maps, it is a question that we have also asked ourselves, like many users, and we have consulted the brand, but as far as we know, it does not seem that it will be included in this model, since now They have others with several maps (however, just as now they have also added voice commands through Alexa and Google Home, perhaps they will include it in the future).
Regarding the USB that you mention, it is rather for internal issues of the Technical Service, we do not recommend this type of intervention, as perhaps they could void your warranty.
All the best
I have purchased the conga 3090 and I must say that what it is at the hardware level is amazing, it is powerful and so far it makes the map of the house perfect for me, but the application and I had to install an older version, there was no way I could stop it the saved map, and therefore when I went to select an area to clean the entire map was deleted (the save map function was activated), I think they should solve that and be able to save more than one different map, the truth is, it would also be interesting that voices could be added when it starts to vacuum or when it returns to the base like in the Xiaomi, although it seems silly, I love it and it would be great, I would also like to know what the USB that comes with the battery is for, and I tried I connected the PC but it didn't recognize anything, I wanted to see if I could add a file to give it a voice, hehe
all the best
Hello, Jose, thank you for visiting our website.
Most likely, the wheels will have to be changed, it is best that you do not disassemble anything, so as not to lose the warranty, and that you contact the Cecotec SAT (96 321 07 28) to solve it.
All the best
I've had the vacuum cleaner for a year and it works wonderfully. But for a few weeks it hasn't worked well because it always turns left. The left wheel turns slower than the right and hence the problem. It doesn't seem to be a software problem because it doesn't work well when pushed from the back either, so I was wondering: how can I take it apart to fix the wheel? There is a screw at the base of the wheel, but you can only get to it after removing the bottom cover, but I have removed everything and all the screws and still you can't. What do you advice me to do?
Thank you
Hello, Antonio, thank you for visiting us.
No, it is not essential, the robot vacuums well, has a lot of power and a HEPA filtering system, so it will collect dirt and hair well, and leave the environment cleaner. Of course, pet brushes greatly reduce tangles, so they are interesting in that sense (in addition to doing a good job on carpets). We do not know why in the case of Conga 3090, they released it without a specific brush for pets, when the new range of Conga, the only one who had this brush was the Conga 1090. Now, in the new range that is coming out, both the Conga 1090 Connected and Conga 3490 yes they include it.
All the best
Hello Joan, thank you for coming to our website.
If you put the tank with water, the Conga It will scrub in any cleaning mode, as it progresses, it will wet the floor slightly (another thing is that it also has a specific scrubbing mode, where it performs the Scrubbing movement, back and forth, drawing a kind of palm tree).
It is possible that, for whatever reasons, the filters are not allowing water to pass through, perhaps they are clogged (in areas where the water has a lot of lime, it is advisable to use filtered water to avoid this).
La Conga 3090 has some filters, which are under the mop. With the robot you will have received a small cardboard case with some additional replacement filters. In addition, a little skewer will come, which you can use to slightly puncture the filters that you have under the mop, see if this solves the problem and the water is falling downwards. If it doesn't, you should change them, following the instructions on the package itself.
All the best
Hey.
I bought the conga 3090 and I put water in the tank and parquet cleaning product and it doesn't scrub anything. It seems that no water is falling. What must it be due to?
In all cleaning modes does it mop?
Thank you
Hello, I just wanted to ask a question. I have had the Conga and I am very happy with it, before I had a Series 6 Roomba and nothing to do with it, this one is much better, more powerful and with many more options and it also scrubs so we are delighted. I wanted to know how I can know if she is applying the turbo mode on the carpets, the truth is that it leaves them very clean, but I want to know if she is doing it or not.
Thank you
Hello, Angelina, thank you for coming to our website.
Turbo mode is activated automatically when the robot is placed on a carpet. If you're not cleaning at full power, you'll notice the robot increase power when that happens. However, to check it, you can go to the robot configuration, clicking on profile-robots, and pressing the arrow that appears to the right. There you will see an option that says "Turbo mode on carpets", which must be activated, in blue (when it is deactivated, it appears in gray).
All the best
Hello, I agree with what Carlos comments, exactly the same thing happens to me with maps. Also, sometimes with the mess of maps he has, he leaves rooms uncleaned. Thank you so much
Hello again, Carmen, thank you for your visit.
We would recommend the same thing as we have said in some other case, it is best that you restart the map. In any case, it is an issue that we have already conveyed to the brand, we hope that it will be corrected in future versions of the app.
All the best
I've been using it for 2 months and without a doubt it is a good robot vacuum cleaner and perhaps the best, in terms of quality-price ratio, although there are things that could be improved, logically, and I think the most urgent thing is that they solve the issue of how the mappings it makes are saved. Well, I have tried doing 2 cleanings in a row, in eco and auto mode, with the map restarted and the first does it perfectly and the second, without moving a single piece of furniture in the house, does it with a slight overlap, slightly rotated and Already in a third mapping, a chaos of lines begins to form. The mirrors on the doors of the built-in wardrobes are interpreted as a continuation of the room, despite having a plinth below said mirror. I think that the laser maps at too high a height and should limit it to the height of the robot itself, so that it knows where it can pass. Another defect that I have verified is that if an area is selected that corresponds to an entire room far from the charging point and that to get to it you would have to go through the corridor, which makes an "L", try to reach it by the shortest line, in instead of going down the hallway, so it misses its target, I don't know if this is because when I select the area, I mark the entire room, leaving the edges of the selected room within the selected area and maybe I would have to do that the selected area is within the boundaries of the room; Although if so, it is still a failure of the app. And finally, automatic cleaning should do it for complete rooms, but it does not always do so and sometimes it leaves a part of a room without going through and after going to another, it returns; This makes cleaning a little messy and poorly optimized.
I think that all these defects that I expose and that refer to configuration, are easily correctable, as soon as they decide to release an improvement for the robot's firmware and another for the app. Currently I would give this robot an 8 out of 10 and if they managed to correct these small inconveniences, it would be a 9,5. The 0,5 that I left unmarked would be for when they get him to upload the Ikea long hair rugs that I have in my house, where sometimes he tries and ends up giving up, very successfully, but other times he dares to get on and ends up not being able to get out of them.
Hello, Carlos, thank you for visiting our website and for sharing your experience.
It is certain that there are always things to improve, we like the approach you make, that you would give it a 9,5, leaving 0,5 for issues that could be improved, we must always aspire (pun intended) to continuous improvement . Regarding the issues you mention, the app is always under review in that sense, to add/refine issues that can be improved, based on user experiences. For our part, we will transmit your impressions to the brand, so that they can be taken into account.
All the best
Hello, I have the 3090 and I am super happy with how clean it is, I use it every day and I have my house like never before. I would like to ask you that due to its use, it has superimposed three maps on me, at the beginning I had a very well made map of my house but now I have a mess of maps. What should I do, I don't know whether to delete it and start again or leave it like this. Thank you very much for this very useful forum. Have a nice day.
Hello again, Carmen,
Possibly the best thing in that case is to start over; In profile-robots, you have an option to restart the map.
All the best
Good morning
I recently bought the robot conga 3090 and I wanted to see if you could clarify some things about the settings:
1. What is the use of changing the robot's name?
2. In settings in the voice section, what is it for, well, I don't see the use of it.
Thank you very much for your prompt response and receive a cordial greeting.
Jose Amaya
Hello, José, thank you for visiting us.
The name of the robot can be in case you want to "baptize" it (many people give it a name), or also, if you have more than one robot, to distinguish them.
As for the Voice section, right now (we don't know if it will be used for anything else in the future), it is more like "sound", the robot beeps when an order is given, and in that section, you can lower the volume or deactivate it. those beeps.
All the best
Hello! Could it be used every day on a different floor in the home?
Hello, María, thank you for coming to our website.
Yes, you can, the only thing is that the robot (at least, today) can only save a map, but otherwise, you have no problem, you can clean different floors or houses.
All the best
Hello: Thank you very much for this great forum. I have the conga 3090 and I would like to know if the programming is done by remote control or by mobile phone. In the instruction book it is confusing, it says that programming can be done from the remote or from the cell phone, and a little later it says that programming must be done from the remote. And I don't know what to do anymore. Thank you very much.
Hello, Carmen, thank you for your encouragement. You can do the programming from either of the two. In the case of mobile phones, when you enter the app there is an option that sets a schedule, you click the + at the top right and create it, in a similar way to how you create an alarm; To program it using the remote control, you can watch this video https://youtu.be/lTyzucEI-t4
All the best
Hello: thank you for this forum, it is very good. I've been with her for a week conga 3090, and I need help, the first time I put it in eco and auto mode, and it made the entire floor plan in 110 minutes. The next day I put it in eco and auto mode but I put the mop on it, and it took 242 minutes to do the floor and it was there all day, because it needed charging three times. I don't know what this is due to.
Furthermore, they have told me that in order to make the map correctly, I have to put it in the borders model, but they have also told me to delete the map and start again. I would certainly like to ask what is best.
Hello, thank you for visiting us, and for your encouragement.
Well, we couldn't say exactly, possibly when carrying the mop, you have greater difficulty on some type of floor, for example, on carpets. As for mapping, if you have done it in automatic mode, it is fine, we have also seen this edge mode advice in some cases, but we have not tried it; In principle, in automatic mode it is the way in which it will go through the entire house and map all the rooms, including the furniture that may be in the middle, in edge mode, something could be left in the middle without mapping.
All the best
Hello, I wanted to know. I bought it.conga 3090 today and I charged it before using it for the first time and do I have to leave it on the base for 12 hours? And she said that I didn't get the orange power button for 30 minutes. Can I leave it like this?
Hello Marga, thank you for visiting our website.
Although the robot may come partially charged (it is common for them to come this way), it is advisable to fully charge it before using it. The first time it is advisable to do a long-term charge, to ensure that the charge is complete.
All the best
Hello, after reading the article I am almost convinced to buy the 3090, but I want to make sure that it is suitable for homes with pets (2 cats) that shed a lot of hair, or if another option like the 1090 is better.
Thank you very much
Hello Jennifer, thank you for visiting our website.
Any model from the new range Conga It is suitable for vacuuming animal hair, but in the case of Conga 1090, includes a special silicone brush, which helps remove them from the carpets, avoiding tangles. In other words, it is easier to maintain, because it largely avoids the work of untangling hair from the brush (something that, on the other hand, also has to be done not only with animal hair, but also with people's hair. ).
From there, the decision would be between a vacuum cleaner with random navigation, but with that special brush, or a more advanced model, with greater suction power and laser navigation, but more expensive.
All the best
Hello! We have the Robot conga 3090 we have had it for two weeks and we have only used it in Eco/auto mode so that it recognizes the floor plan of the house well, except on the last day when we put the zone mode on for a moment.
The robot sucks very well, but we have seen a couple of things that we don't know if they are normal.
Firstly the mapping. On two occasions he has made a completely different map than the one he normally has, at the time the cleanup was taking place he deleted the old map that was correct and started making a new one that was not correct.
Another day in the application two different maps of the house appeared, one opposite the other.
On another occasion it seemed as if the robot became disoriented, that is, it was cleaning in the kitchen but on the map it appeared as if it were in the bedroom. After a while the robot ran out of battery and did not go home to charge.
The last time we put him in zone mode for a moment so he could vacuum the kitchen, we marked that exact area on the map and when he finished he didn't go home either, he stayed standing in the middle of the kitchen.
We wanted to ask if this is normal at first or should we do it all over again.
What we understand least is that the robot does not come home when it runs out of battery.
We would appreciate it if you could advise us on how to get the most out of the robot, and if we are doing it right or if something is wrong.
Hello, David and Angela, thank you for coming to our website.
Perhaps it is best to start the process again. To do this, go to profile-robots and by clicking the arrow to the right, access the settings, and click on restart map. Once restarted, you can try cleaning in edge mode, so that it will clean close to the walls, and will quickly recognize the floor plan.
The disorientation may have to do with that map overlay that happened to you, or perhaps the location of the base is not the best. Just in case, simply remember that, as far as possible, it should be in a clear place and in a central area of the home. Otherwise, you shouldn't have any major problems detecting the base.
All the best
Hello, very good, we have one conga 3090, for 2 weeks and the truth is that we are very happy with it. I wanted to ask if it is possible to put the
water tank a little bit of floor scrubbing or on the contrary some component of the unit could be damaged. conga Thank you
Hello, Fernando, thank you for visiting our website.
Yes, you can add a small amount of non-corrosive, non-foaming floor cleaner, in an approximate proportion of 10 ml per 100 ml of water (the tank has a capacity of about 160-170 ml).
All the best
Hello, I am considering buying a robot for my home. I have been reading about this type of appliance for several days and I am a little saturated with so much information to be honest... I was almost decided on a Roomba but certainly seeing others with similar characteristics and half or less The price makes me doubt. The fact is that my house is a 2-story villa of about 100 m each. I have read about houses with several floors that this model of Conga It doesn't save the maps, so would it be more practical to buy a robot without a mapping system? According to what I read, it takes several days to make the map of a house, so I could only use it on one floor? In my case I would put it more on the ground floor than where we spend the day and get more dirty, but obviously I would like to put it on the ground floor as well. upstairs where the bedrooms are. Is it possible or would it drive the robot crazy? Isn't it advisable to put it on several plants? Sorry for so many questions but it is the first one I am going to buy and a priori this seemed easier to be honest, there are many models with many features and different characteristics and it has reached a point where I don't know which one to buy! (At this rate do I see myself with the mop for life?)
Thank you in advance and I reiterate my apologies for so many doubts.
Hello, Beatriz, thank you for visiting us.
Yes, it is true that there is a lot of information, and there are more and more models on the market with quite good features, nothing to do with the situation that existed just a few years ago, where Roomba was practically the only interesting option. As for saving several maps, for now, you have the new Roomba i7 (and i7+), but they are models that cost around 1.000 euros or more, or Neato models like the Botvac D6 and Botvac D7. For a house with several floors, there is no problem with these robots, both in the case of Conga 3090 (such as, for example, another excellent alternative, such as Xiaomi Vacuum 2), you would have one of the floors mapped, which would be the main one, and in the other, thanks to its laser navigation, it would also clean without problems, the only thing is that you could not use options there that are defined on the map, such as cleaning of restricted zones or areas.
Don't worry, ask whatever you want, we will try to help you :-). The truth is that a robot vacuum cleaner is a great help at home, especially in large homes, surely when you decide on one, you won't miss the mop?
All the best
Hello
In "zone" mode, can you change the size of the square that appears by default? And if it is possible, does it have any size limit?
I ask this because my Conga It is in the living room on its charging base, and I try to have it vacuum the kitchen by selecting the room on the map with the zone mode, adapting the box that appears by default to it, and it tells me that the zone is "too long". My entire apartment is 70 square meters so it's not like the kitchen is very big...
Is this normal or is it that my Conga has some error...
Thank you very much for your help
Hello Nerea, thank you for visiting our website.
In zone mode, you can change the size of the square by dragging along the corners, to make it larger or smaller (until you reach a certain size, from which it cannot be reduced further). We have tried to install a very large area, and it has not given us any problems. Try modifying the size of the area by stretching around the corners, and tell us.
All the best
In a duplex home, is there an option to keep both floors?
Hello, Natalia, thank you for visiting us.
No, at least currently it is not possible. This will probably be one of the improvements that the next generations of robots with advanced navigation will incorporate (some rumors are in this direction), and it is also possible that some of those currently in existence will add it in firmware updates.
Precisely, not long ago we talked about the Roomba i7, and this option to save several maps caught our attention (but it is a fairly expensive device). You can also look at some Neato models, such as the Botvac D6 and Botvac D7.
All the best
Hello, I would like to know how to change the side brush, if it has a clip or if it is simply by removing the pressure, it shows that it is quite hard, I don't dare to pull it.
it's 3090
Hello, Máximo, thank you for coming to our website.
Don't worry, you just have to pull it out. To remove it more easily, you can hold it by the three blades of the brush and strips at the same time, and that's it.
All the best
Hey.
I have a doubt.
If I do a complete mapping, it is memorized and I leave it saved, then I deactivate the saved map, when I clean it again will it still use the first map that it has saved?
Will it not modify anything on the map you already have?
Can everything be used as cleaning of an area or restricted area, etc...?
And finally, if I activate the saved map again, will it show me the map that I had saved before deactivating it?
Greetings thanks
Hello again, Jolupo.
We have tried deactivating the map and activating it again, and it deleted it, so we had to generate it again. That being the case, it could not be used as you say (since if you deactivate it, it deletes it). The restricted area is saved on the map, so that it prevents the Conga get in there in the cleanings. To remove it, you would have to deactivate it, clicking on the marked area and pressing the cross.
All the best
Hello, I recently bought the conga 3090 and I need those small filters that are in the floor mopping accessory. But I go into the store for spare parts and I don't see that you sell them. Where can I get them,? Thank you
Hello Julia, thank you for visiting our website.
You can manage the filters directly with the Cecotec SAT (if you want, you can contact them through This formulary).
All the best
Hello,
I am thinking of buying the Conga 3090, is it necessary to have Wi-Fi at home, or can all the cleaning, scrubbing, etc. tasks be carried out by installing the app on the mobile phone??
Thank you very much!
Greetings.
Hello, Iban, thank you for coming to our website.
You would need to have Wi-Fi at home, since the robot will connect to the Internet through Wi-Fi, and in this way, you can manage it through the app, the Wi-Fi acts as a connection gateway for the robot (in short, you need the robot, in some way, it is connected to the Internet, and the easiest way is through the home Wifi router, from which the 2,4 GHz frequency must be selected, and not 5G).
All the best
Hello. I have to make a correction, in the previous comment I said that the map has changed and it is not correct, I meant that the charging base has changed on the already memorized map.
Sorry for the bad explanation above.
Greetings and thanks.
Hello, again Jolupo, thanks for your comments, don't worry, it's clear :-).
Well, the truth is, we couldn't say why he changed it. Perhaps (we don't know if this is the case), at some point you have transported the robot from one place to another in the air, and this could have disoriented it with respect to the map it had memorized.
One solution is to go to profile-robots in the app and click on the arrow that appears to the right of the robot image to enter settings. There, you have an option to reset map, so the robot will create it again.
All the best
Hello good.
I already wrote previously with a couple of questions that were answered satisfactorily. But now I have a little problem and it is the following.
So far everything has been going very well for me, I put the charging base in a place that fit correctly and I have had no problems when I had to go to charge, but today when I put it to clean it seemed that it was a little lost and on the map it He has even memorized where the charging base is, when it is not correct since said base I do not know has changed location, the map that is is correct but as I said, he has changed the base on said map and he does not know how to get there because it is not where you have it memorized.
My question is:
Why did I change it?
How can I put the charging base on the map where it really is?
Greetings and thank you.
Hello, I really liked your article.
I have a couple of questions.
The first is, in the app where it shows the battery level, I get a battery but it doesn't show me the remaining battery level and I have seen in videos and photos that it comes out like lightning and the battery level in numbers , I have searched for it in the app and I have not found it to put it. How do you activate that function?
And the other question is, can I restrict an area and leave it memorized until I want to remove it without having to always put it in?
By the way, I've only had it for a few days and my wife and I are delighted.
Thank you.
Hello Jolupo, thank you for visiting our website, and for your kind words.
As for the first question, the point is that you cannot... Before, the percentage appeared in the app, but in some update they changed it to the stripe system, and it cannot be configured.
Regarding the restricted areas, it is now possible to memorize them, they have already updated the app to add this functionality.
Thanks for sharing your experience.
A greeting.
Hello, good morning, to empty the dirt tank do I have to remove it from the charging base? Or is it not necessary? Thank you
Hello, María, thank you for visiting our website.
No, it is not necessary, you can take the deposit while at the base or anywhere else, without problem. We usually take advantage of emptying the tank to clean the brushes of tangled hair, but you can do it as you wish.
All the best
Hello good. I have a problem with my scrubbing conga 3090. When I fill the water tank it wets the mop but after a while it stops wetting the mop and it does not scrub. It stays dry and almost all the water I put in it is in the tank. And I don't use floor scrubbers. And the filters have just been changed.
I can do?
Thank you.
Hello, Carlos, thanks for visiting us.
In principle, there should be no problem in that sense, because the Conga 3090 works by decantation, that is, the water falls due to gravity. That is, if it falls at the beginning, it should continue falling (it would mean that it is not obstructed). However, you can check it by filling the water tank and removing the mop, and see if it is dripping.
On the other hand, it is advisable when mopping with this robot to wet the mop slightly from the beginning, as this contributes to a good scrubbing.
All the best
Good afternoon, I bought the Conga 3090 last week, and I don't know if it is normal that the battery only lasts about 30 minutes, and it returns to the base to charge again, when I also put it at the lowest power level it has, and I already have it It has been running for 5 or 6 days, so I understand that the battery should already be fully charged.
Thank you.
Hello, Raquel, thank you for visiting our website.
Perhaps in the route that the robot takes it will have some carpets (on which it will use maximum power, if the Turbo mode is activated (in profile-robots), which would reduce its autonomy (it would be necessary to see how many and to what extent it influences). However, if this is not the case (that is, if there are not many carpets), we find that 30 minutes is a very short duration, so we advise you to contact the Cecotec SAT.
All the best
Thanks for your reply.
Yes, but in the description it says two filters and it only comes with one.
Does it now alert you when the filter and other parts need to be replaced? I think roborock warns, this one I don't know.
Hello Miguel, it is 1 filter, in other models Conga Yes, a spare one comes, and in this one, initially we also understood that it was going to be like this, but it is only 1.
As far as we know, there is no warning yet. Depending on the use, the brand recommends doing it between 3 and 6 months, but it is also true that in practice, from our experience, they usually last longer.
All the best
Hello, I'm sorry if you get any errors, I am Portuguese and I wrote to the translator.
I have a Conga S3090 two days ago, what happens is that from time to time I send a new task and he seems kind of confused and after a few times he forgets the map and starts making a new one.
It is normal? Shouldn't I always keep the house map?
And now other information, it does not come with 2 HEPA filters (1 + 1 spare), it only comes with one HEPA filter already installed.
Hello, Miguel, very brave, it is perfectly understood.
Starting with the second question, yes, it comes with a filter.
Regarding the mapping, we will tell you how it works. In its first tours, the Conga 3090 creates the map of the home from different angles, thanks to its laser-based system. When it has completed it, it will save it, and from there, you will be able to use the full extent of the possibilities offered by the Conga 3090 through the app. To make the task easier for you and to finish before completing the map, you can put it to work in Eco mode, since this way it will have more autonomy.
When the robot has the complete map of the house (perhaps it completes it from several angles, and needs more than one tour), it will save it. However, if you click on profile-robots, and press the arrow that appears to the right of the robot image, you enter the settings, and the memorized map option should be checked there.
In short, give it a few days and let it walk around the entire house, and then verify that this option is checked. As soon as the robot has the complete mapping, you will have it saved and you will be able to use all the options.
All the best
Good Morning.
I've had the 3090 for a little over 1 month and I'm quite happy with it. It does everything I expected and in a fairly correct way, so it has saved me a lot of work. However, there is a peculiarity and a couple of problems that somewhat cloud its work.
First of all the peculiarity. It is common that, after putting it in eco and auto mode, it enters a room, does half of it, leaves and then, when it has already done other rooms, returns. He doesn't just do it in one, but in several and that is not very "intelligent" on his part, because he wastes time going back and forth. He has the complete map and does it systematically, finishing in the end, after one load, the house. But if he didn't leave and come back he would end up not needing to "refuel." Because it can be?
On the other hand I have a problem with the tank scrubbing filters. They clog very easily, so a couple of times, after doing 3 scrubs each time, they have stopped working and the robot comes back with the tank full and without having scrubbed, so I have had to change them and it comes back to work well. I barely put floor cleaners in the tank (a few drops), but they end up clogging up. And besides, I can't find replacement parts for those filters anywhere. Is there any solution? Can you get spare parts? Where?
Also, when I put it to mop, it doesn't have enough water in the tank to finish the house, but when I try to stop it by pressing the pause button and refill the tank, the mopping session is deleted and it doesn't resume the session to finish the house. . Is there a way to stop it and have it resume scheduled work without being logged out? Of course, the pause button is not useful for that, since I have tried it several times and the session has always been deleted.
Finally, I would like to know if there is a brand forum or website where I can send suggestions for modifying the app. I think that the robot, in terms of task programming, is completely wasted.
Thank you for your great work and greetings.
Hello, Luis, thank you for visiting us and for your encouragement.
Regarding the route that the robot takes, check if you have the latest version of firmware (normally you will, because it will automatically check it and install it, but just in case). It can also be affected, in some cases, by luminosity; sometimes, bright situations can throw the laser off a little. If not, tell us, and we will try to think if there could be any other reason.
As for the filters, you will get a skewer in the replacement bag, which you can use to lightly puncture the filters, thus unclogging them. Check if the cause could be the type of water, if you use water directly from the tap and it has a lot of lime (if so, try using filtered water). On the other hand, now there are still no spare parts on the website, but you can manage it through the Cecotec SAT (http://www.cecotec.es/sat).
Regarding filling the tank, try doing it without moving the robot, if you move it to fill it, the robot will move out of position.
As for the app's forum, you can leave comments through the App Store or Google Store.
All the best
Hello, Begoña, thank you for visiting our website.
If it has been turned off, cleaning will start again. On the other hand, although the robot is capable of avoiding some entanglements with the cables, it does not hurt to make the task easier in this sense, and remove any cables that may be present, to avoid possible problems.
On the other hand, effectively, one tank would be for simply vacuuming, and the one for the mop, which can be filled with water or not (that is, you can dry mop, or scrub). At the same time as it scrubs and/or mops, the robot will vacuum.
When you program it, the robot will go out to clean in automatic mode. Theoretically, you could leave it with the water tank on, and it would go out to scrub. However, there is a problem, and it is that it is not recommended that the robot go to the charging base with the water tank, since it could wet it and damage something (and if the robot runs out of battery, it will return to the base) . Therefore, in our opinion, it is best to use it to scrub when you are at home, to avoid this type of situation.
All the best
Hallo, die Frage von Mario vom 10.12.18 wurde nicht vollständig beantwortet. Auch ich hatte dieses Problem and night viele andere mit dem Conga Wie Reichweite der Position nicht über 7m und findet kein Position im Nachbarzimmer usw. Auch ich fahre auf eine Position, dann Stopp, dann Sperre ändern. Daraufhin ist die Karte complett weg und alle Sperrungen sind auch weg! Meine Bilder und Videos davon und von anderen Bugs auf Amazon.es wurden mehrfach nicht veröffentlicht!!!
Hello Steffen, thank you for visiting our website.
We understand that you have asked this question on Amazon and have not received an answer. Unfortunately, we have translated with Google translate, but we do not understand exactly what the problem is (sometimes these translations are not very exact). Can you ask the question again? Thank you.
All the best
Hello, I have recently purchased the conga 3090 and the truth is that I couldn't be happier, now my house is always clean, I put it from work or from anywhere to clean it is a joy... just one question if I understood it correctly, until I have the finished map I can't use the advanced functions of zones and all that, right? Thank you for your fantastic page.
Hello, Alicia, thank you for visiting our website.
That's right, part of the advanced functions of the Conga They are based on the map it creates (such as the areas to be cleaned, the restricted areas... you can use these functionalities when you already have a map created, and you can define in it what to clean or what not to clean.
In its first tours, the Conga 3090 creates the map of the home from different angles, thanks to its laser-based system. When it has completed it, it will save it, and from there, you will be able to use the full extent of the possibilities offered by the Conga 3090 through the app. To make the task easier for you and to finish before completing the map, you can put it to work in Eco mode, since this way it will have more autonomy.
When the robot has the complete map of the house (perhaps it completes it from several angles, and needs more than one tour), it will save it. However, if you click on profile-robots, and press the arrow that appears to the right of the robot image, you enter the settings, and the memorized map option should be checked there.
In short, give it a few days and let it walk around the entire house, and then verify that this option is checked. As soon as the robot has the complete mapping, you will have it saved and you will be able to use all the options.
All the best
Hello, I bought the robot vacuum cleaner on January 20 CONGA SERIES 3090. It has worked very well this month, but it turns out that today I put it to work and the suction motor does not start. The robot starts working but does not suck anything. Do you know what can happen and how it can be solved?
Hello again, Javier.
If it works without vacuuming, it could be that the battery is not properly charged. Try restarting the robot by pressing the button on the top for a few seconds (until it beeps) and then leaving it charging for a few hours.
All the best
Hello again, the battery is fully charged and the robot has restarted. It starts up, goes through all the rooms but doesn't suck anything at all. It's like the vacuum cleaner motor doesn't turn on. All the best.
Hello, Javier, in that case, you can try doing a deeper reset/cleaning, as follows:
– Reset the robot: delete the app, disconnect the battery (you can see how in This Video) and reconnect it, install the app and configure the app and the robot.
– Thoroughly clean all filters and brushes, disassembling and assembling everything well.
If it still doesn't work (or you can't decide to do all that), it's best to Contact the Cecotec SAT, to process the collection and review from the technical service.
All the best
Hello, according to a previous comment, you have never left the base to complete the work you left pending. Could it be because he doesn't consider that he has the complete mapping and doesn't really know if he's missing something?
Your answer was: When the robot has the complete map of the house (perhaps it completes it from several angles, and needs more than one tour), it will save it. However, if you click on profile-robots, and press the arrow that appears to the right of the robot image, you enter the settings, and the memorized map option should be checked there.
In short, give it a few days and let it walk around the entire house, and then verify that this option is checked. As soon as the robot has the complete mapping, you will have it saved and you will be able to use all the options.
I have already done that and it still does not work when the battery has run out, what could be the cause or how can I solve it?
Thank you
Hello again, Julia.
Perhaps the issue is the cleaning mode used, in order for it to clean the rest, it must be in Auto mode.
All the best
Good afternoon! We have the Conga 3090 since this Christmas and the truth is that everything is perfect, vacuuming, cleaning, scrubbing...
Today we went to connect it from the app like every morning and it went offline, however there is internet at home. We just looked at the app again from work and it's still offline. What could it be due to and how is it solved?
Thank you very much and congratulations for your work!
Hello, Victor, thank you for visiting our website and for sharing your experience.
If it does not come online, it may be because it has run out of battery, or because it momentarily lost connection to the router, and then did not reconnect. Normally, this is solved by restarting the router (after which, after a few moments, the robot will reconnect). If this doesn't work, you can also try closing the app session and starting it again (to close it, click on profile, and then on the exit button in the upper left corner).
All the best
I saw the study you have done on it. Conga 3090, it convinced me and I bought it (thank you!). Now I have two doubts:
1 – If I select the “Scrubbing” option in the app, does it only scrub?
2 – How should I program it in the app so that it vacuums and scrubs at the same time?
Thanks again
Hello, José Carlos, thanks to you.
The robots Conga, this included, vacuum and scrub at the same time. In the case of Conga 3090, the solids tank is inside, and the liquid tank goes with the mop underneath, so it will do both things at the same time (there are other robots on the market that do not do this, either because they are covered by the mop the vacuum area, either because the vacuum function is blocked when they are scrubbing).
In this case, in addition, the special scrubbing function that the CongaScrubbing type (in which you swing back and forth, imitating human movement) is especially effective. If programmed, the robot will clean automatically, so it will not perform this movement (at the moment, they have not included in the app the possibility of programming the robot to clean with a specific function, although it is possible that they will include it in the future ), so it will clean by "normal" scrubbing, without doing the back-and-forth (which does a good job anyway).
Another aspect must also be taken into account: if you program it to scrub, it is possible that at some point the robot has a low battery and wants to charge (we understand that if you program it, it is because you are not at home). In this case, it would be advisable that you not be able to go to the charging base, since it is not recommended that you go up to it with the water tank, so that it does not get wet. That is, you should unplug or move the charging base away, so that it cannot go to it.
All the best
Hello, I have the conga 3090, and it turns out that I had the map well made, and I have had it make borders and I duplicated the map, it has made two kitchens, it has passed through the same place twice, I don't know what I have to do to make it stay the correct map and being able to do more things with the machine. Thank you very much for this fantastic forum. I wish you a good day.
Hello again, Carmen.
Well, we wouldn't be able to say exactly, if you already had the kitchen on the map, perhaps something has moved (the base, some furniture?) or for some other reason, it has been detected as another room. As a solution, you can go to profile-robots and click on the arrow to the right, to enter the settings, and there, click restart map, to create it again.
All the best
Hello, I have two days Conga 3090, and my question is: When it is fully charged, can we turn off the robot and unplug the charging base from the power? Or should both things always be on?
regards
Hello, Javier, thank you for visiting our website.
The usual recommendation in the case of this and other robot vacuum cleaners is to keep the charging base plugged in and the robot on (it will be on stand-by) and connected to it when it is not working. Don't worry about consumption, it's minimal.
The exception would be when we are going to be without using it for a long time (several weeks), in which case the charging base could be disconnected and the robot turned off, and even, if it is going to be used for a long time (more than a month, for example) remove the battery (in Conga 3090 can be done easily, as seen in this video https://www.youtube.com/watch?v=vM2QA5W1-ho).
All the best
I'm almost determined to buy the Conga 3090 after seeing your analysis, but I have one question left.
At home there are two people with very long hair and there are always loose hairs on the floor. I have seen many models that talk about collecting pet hair but I doubt if 30 cm hair could clog the brushes. Do you recommend this model or one with silicone brushes?
Thank you very much
Hi Teresa, thanks for stopping by.
We can tell you, from experience, that there is no problem with long hair. However, it will be a little more work, because the hairs can get wrapped around the brush, so what you have to do from time to time is cut them with scissors.
It is a common issue in robots that have a central roller, which is the majority. There are some exceptions, which may be interesting in the case of homes with a lot of hair, such as the roomba e5, with its special double rubber brush design, or robots that opt for a nozzle instead of a brush, like the Deebot Ozmo Slim 10 or the Conga 950. It must also be taken into account, of course, that all of these, being great robots, do not have some of the advanced characteristics of the Conga 3090. We hope we have helped you.
All the best
Is it essential to have a pet brush? Why don't they have the 3090?
Teresa, my experience with the device and with cecotec has not been positive at all. She believed that being Spanish would make it easier for her to solve problems and that was not the case.
Good luck
Hello María, thank you for visiting us, we are sorry that your experience was not good.
All the best
Good morning,
Thank you very much for the article and the answers to users' questions.
I have the Conga 3090 a few days ago and we are still not getting to know it :).
My main question is about the mapping of the house. I have put the operation in auto mode on several occasions and I see that it is generating the map of the house, although it is not completely defined. How do I know when it considers it has completed the mapping? The thing is that I have a wall mirror and it has drawn as if another room continued behind the mirror. He has left that part diffuse, but he will not be able to complete it, because it does not really exist.
On the other hand, he has never left the base to complete the work he left pending. Could it be because he doesn't consider that he has the complete mapping and doesn't really know if he's missing something? Although it has a drawing of parts that have been left uncleaned.
And finally, what exactly does the "night mode" that appears selected in the app do?
Thank you very much and greetings
Hi Julia, thank you for stopping by and for your words of encouragement.
In its first tours, the Conga 3090 creates the map of the home from different angles, thanks to its laser-based system. When it has completed it, it will save it, and from there, you will be able to use the full extent of the possibilities offered by the Conga 3090 through the app. To make the task easier for you and to finish before completing the map, you can put it to work in Eco mode, since this way it will have more autonomy.
When the robot has the complete map of the house (perhaps it completes it from several angles, and needs more than one tour), it will save it. However, if you click on profile-robots, and press the arrow that appears to the right of the robot image, you enter the settings, and the memorized map option should be checked there.
In short, give it a few days and let it walk around the entire house, and then verify that this option is checked. As soon as the robot has the complete mapping, you will have it saved and you will be able to use all the options.
On the other hand, what you mention about the mirror can happen. Being a light-based system, it can interpret the mirror image as if it were another room, so the only solution we can think of is to cover or remove the mirror.
As for night mode, when activated, the robot will not work between 22:00 p.m. and 7:00 a.m. (we take advantage of this issue to include it in the frequently asked questions section).
All the best
Hello, is it possible to know what the application updates include? Is it always necessary to update?
Thank you and happy holidays
Hello, María, thank you for your visit, and happy holidays to you and yours.
In response to your question (which we will include in the FAQ section, because we find it interesting), it is good to update the app, since as with any software that is updated by the manufacturer, updates include corrections to problems and improvements; among other issues:
1. They optimize the efficiency and autonomy of the battery to last longer.
2. They improve intelligence and navigation parameters, optimizing home cleaning.
3. They correct bugs and install improvements in connectivity, device compatibility with Wi-Fi, etc.
4. They provide access to exclusive features, firmware updates and the latest news and, ultimately, allow you to get the most out of your robot vacuum cleaner.
All the best
Hello good. After two weeks I return to the forum. To me the Conga It's driving me crazy. I changed one because it left the base for 4/5 minutes and returned or stayed in the middle of the house with more than 20 tasks already assigned, but now the new one is impossible for me to connect to any of the three mobile phones that I have tried and installed the app. The IP configuration on the Wi-Fi does not recognize me Conga and assured 100% that my home Wi-Fi is 2.4Ghz. It keeps indicating “Obtaining IP address”
This device has me tired. Very tired
Thank you
Hello, Víctor, I imagine that you have already seen the videos on how to connect the Conga… We are sorry for what happens to you, we have not had any problems in that regard, with different mobile phones, nor do we have news of anyone who has had them.
What occurs to us, in this sense, is if it is possible that it is a question of the Wifi configuration: in the manual it says that the keys of your network must not exceed 32 bits, so you have the configuration of Wifi security very high and you exceed these 32 bits, it may not work. On the other hand, if your network has a hidden SSID, it will not connect either.
Another possible solution is to uninstall the app and reinstall it, and do the process again.
You tell me what's up.
All the best
Hello. I bought one of 3090 a little over a week ago. I am very happy with my ROBOT, it sucks very well and scrubs quite well.
But I have 2 doubts.
First: Can the mop be put in the washing machine to wash? In case it is possible. So at what temperature?
Second: Is there a way to have the map fixed once mapped? Because sometimes I manually send it to a room and after getting here I send it to scrub and it turns out that it maps again as if it didn't know. And it's very annoying because I can't set the restricted areas since I don't have maps and not when it's cleaning.
I hope for some solution or some trick.
Thanks in advance.
A greeting.
Hello, Mario, thank you for visiting our website, and for sharing your experience with the robot.
Regarding the first question, the mop can be washed in the washing machine, at 30º (we will take the opportunity to include this question in the frequently asked questions).
Regarding the second issue, the Conga 3090 carries out the complete mapping of the house in the first days. To do this, it may be advisable to put it to work in ECO mode (you can choose it in the app, the button located above Control), to make the most of the battery on that route, and thus complete the map sooner.
When the robot has the complete map of the house (perhaps it completes it from several angles, and needs more than one tour), it will save it. However, if you click on profile-robots, and press the arrow that appears to the right of the robot image, you enter the settings, and the memorized map option should be checked there.
In short, give it a few days and let it walk around the entire house, and then verify that this option is checked. As soon as the robot has the complete mapping, you will have it saved and you will be able to use all the options.
All the best
I've had the Conga 3090 and I am amazed by this robot vacuum cleaner.
I have read about a common problem when configuring the application on Android and it happened to me on my mobile that it stayed at the second step and nothing. The solution was to use another mobile phone to pair the robot with the home Wi-Fi and then you can log in on any other mobile phone or tablet with the app installed, so that you close the session on the first one and operate from the second one, although be the one that didn't let you install the first time.
Secondly, it is said in many forums and reviews that with the scrubbing accessory it does not fit into the charging base, in my case I don't have any problem and I can leave the scrubbing accessory on, it only happened to me on one occasion so I think it is more a problem related to the base moving when the robot is loaded than any other issue.
Hello, Icarus, thank you for visiting us again, and for sharing your experience with this robot.
In our case, we did not have that problem that you mention. However, what you point out is interesting, and which we have included in the frequently asked questions, and that is that you can install the application on two devices, and thus manage it from one or the other (logically, not at the same time).
We greatly appreciate you sharing the solution you found, which may help other users who have this happen to them.
On the other hand, regarding what you say about the scrubbing accessory, it is not that it is not capable of climbing onto the base when it is on, but rather that the brand recommends not doing so, since humidity could cause a problem on the base. load.
All the best
Hello, congratulations on the article, it is the best I have seen by far, I was hesitating between this and other competing models but with this I am practically clear.
One question, when I have made the plan, will I be able to delimit, for example, only the corner of my cat's food bowl? Or are they complete rooms?
Hello, Jose, thank you for visiting us, and for your encouragement.
La Conga 3090 has several possibilities to delimit specific areas to be cleaned or not to be cleaned. If you choose zone mode, you can delimit an area to clean, on the map itself you can choose if it is larger or smaller, dragging with your finger from a corner; You can make square or rectangular areas, larger or smaller, but up to a limit (you can't make it very small, it is more designed to choose one or several rooms). You can also choose single point cleaning, and it will clean a 2x2 area around the point you choose.
In your case, we understand that what you want is the opposite, marking your cat's food bowl as a restricted area, which the robot will not access. This can be done by choosing the restricted zone mode, which does allow you to choose any size, from very large to very small, so you can limit the robot's access to the feeder.
All the best
Thank you for such a quick and clear response, congratulations again for how well you did it.
regards
Great, thank you, Jose, we are glad we were able to respond to you.
All the best
Hello
Is the central brush, or the sides, compatible with other models from other brands?
Hello, Sergio, thank you for visiting us.
Well, curious question, really. We have checked if they could be compatible with any model we had around here. In the case of the side brush, the conga 3090 is a click type, with a square shape, which matches some other models. In the case of the brush, it is more difficult, because both the size of the brush and the way it fits would have to match.
However, even if they could fit, both in the case of the side and the central brush, we do not think it is advisable to do so, since each robot has its design, its height, its cleaning angles, etc., so, even if it fits and the robot to work, it may not do it completely well, so this can contribute to the robot not cleaning properly or even breaking down. In short, what is advisable from our point of view is, for each robot, to buy the specific brushes for that model.
All the best
Thanks for the quick reply.
The question is that in the case of other models, such as the Conga Excellence 990, there is compatibility with other brands such as DEEBOT and in this case it is possible to obtain the replacement part at other more affordable prices.
Another question, do you think that in the near future there will be some firmware that improves the behavior of the robot? There is always something to improve.
A greeting.
Hello again, Sergio.
Precisely, in this case, we had a Deebot 300 on hand, and the side brush does fit into the Conga 3090, because they have the same shape, and the robot apparently moves normally. We do not dare to say that the operation in that case is the same as with the original brushes, although we understand that you have already done some tests in that sense :-), as you tell us in the case of the Conga 990.
Yes, the firmware is updated to include improvements that users propose and corrections to some issues. When opening the application, it already informs us when a new version is available, and that we must place the robot on the charging base while this operation is carried out (precisely, today, without going any further, when opening the application, we are told has updated).
All the best
Hello,
Well no, I haven't tried other robots. I did a search on aliexpress and found some articles that mention that it is compatible with other brands.
I confirm, today I opened the application and I have a new firmware.
Thanks for everything.
Ok, Sergio, thank you very much, it's nice to have readers like this, who help complete the information in the article.
All the best
Hola!
I bought the Deebot OZMO 930 and it does not lift the ADUM rugs from IKEA, which are about 25mm high, so I returned it because I have many rugs of that type and in the end I had many areas left without vacuuming.
Does the CONGA Will 3090 lift those rugs for me? If you consider that there are other models that lift those rugs better, I appreciate you informing me.
Thank you very much, greetings.
Hello, Carlos, thanks for visiting us.
Difficult question. The limit of robot vacuum cleaners is usually 20 millimeters (when it is not less), which is what reaches the Congas, including this 3090. Although they have large wheels, which are raised, they are still devices with a usual thickness between 7 and 9 centimeters, so manufacturers seem to have the limit, generally at 2 centimeters.
However, looking at the carpet model that you tell us about on the Ikea website, it says that the thickness is 18 millimeters, so that would be the limit. You can always try it and if you see that it doesn't suit what you need, return it.
The only robot that is a little out of the general trend, because it has a different system, with tank-type tracks, is the Dyson 360 Eye, although it is also much more expensive, and has a higher height, 12 centimeters, so it is not capable of sneaking under places that most robots do pass through. And even then, depending on the type of carpet and the length of its piles, you can have problems.
All the best
I subscribe 100% to what my namesake says, not only is it the most thorough analysis I have read and I have read several, but here in the comments you are at length, congratulations guys.
My question is the following, from what I understand it can be controlled from the mobile phone or with the remote control but it does not have all the functions available. Is it like that? And on the other hand, can it be installed on two different phones? That's how my girlfriend and I could handle it, but I don't know who the robot would listen to XD
Hello, Víctor Manuel, thank you for your words.
Yes, that's right, to have all the functions available, you have to use the app from your mobile. The controller allows convenient access to the operation of the robot, but with limited functionality, it can be programmed, start and pause, choose the power level and operate the spiral and edge modes, as well as the manual mode, and send the robot to the charging base.
As for the app, yes, you can install it on two different phones, although only one of the users can handle it (at least, in the current version of the app); The other user will receive a warning message, indicating that the device is being used by another user.
All the best
Good morning again. The truth is that this forum….they should give you a prize for how hard you work in your answers. Thank you first!!!!!
I have a question, I see that a user indicates that it cleans her in 47 minutes. My Conga The maximum it has been on is 70 minutes and it has been discharged, cleaning in AUTO mode, but nevertheless it is indicated that the autonomy is 110 minutes, that is, the battery lasts about 35% less.
The other question that arises is whether in AUTO mode it should always scrub or not and if there is the option to indicate SCRUBBING OR NOT how it should be applied, because if it has water it always scrubs me.
Thank you!!
Hello, Víctor, thank you very much for your words, they encourage us to continue like this!
The battery specifications are, as usual, in optimal conditions and with the Eco power level (as happens with cell phone batteries, which say they last X days/hours, and then they hardly reach them, because we give them more pressure, or with automobile consumption, for example). It should also be noted that at the beginning, lithium batteries have not yet reached optimal performance, which is achieved after a few charging cycles. In any case, what affects the most in this case is the power, the robot works at 1.000 Pascals in Eco mode, 1.400 in Normal and 2.000 in Turbo mode, so, depending on how it is used, the battery has less. autonomy. By default, it will be in Normal mode, but you can choose the power level both through the app and through the remote control.
Regarding scrubbing, yes, if it has water, it will scrub as it goes. The only solution is to remove the mopping tank, or if you want to mop dry, make sure the water tank is empty. You can also lightly moisten the mop with a mop cleaning liquid, if you want to achieve more shine.
All the best
Hello! First of all, congratulations on the page, it is full of useful information and it is also the only one I have found that responds to all comments and responds quickly (in fact, some do not even allow comments!!)
I just wanted to ask to see if I understood correctly, when programming, is it not possible to use scrubing mode? That is, to use this mode, do you have to do it manually? Will it be possible in future updates? Thank you so much.
Hello, José Manuel, thank you for visiting us, and for your kind words.
That's right, you understood it correctly, when it is programmed, it cleans automatically, currently there is no possibility of programming the robot with a specific function. In future updates, it is possible that they will include it, since they modify and add things according to the feedback they receive from users, but we cannot guarantee that they will do so.
All the best
Hello, I have recently purchased the conga 3090, my question is, if I leave the vacuum cleaner ready to mop in the morning, and before I go to work I remove the charging base (so that when I'm done I don't damage it), and I start work from the app, through the app , cleaning, activating the mopping function for the entire house, is this possible to do?
Hello, Sonia, thank you for your visit.
Yes, by doing this you prevent the charging base from being damaged. Another issue to take into account is the mats, since the 3090 is capable of rising up to 1 centimeter when it has the water tank, so it would be advisable to remove them to prevent them from getting wet.
All the best
Hello,
I am interested in the Conga 3090, from what I have seen of it, it seems to me to be one of the best robots on the market, but I have some doubts.
My intention is to leave the vacuum programmed to clean while I am at work.
Can it be programmed with restricted areas? And with cleaning areas? And different cleaning modes? And power?
Programming example:
– Cat litter area always restricted.
– Monday, Wednesday and Friday at 9.00:XNUMX a.m.: normal vacuuming, marking the living room as a double cleaning area.
– Tuesday and Thursday at 9.00:XNUMX a.m.: eco aspiration.
– Friday at 12.00:XNUMX p.m.: edge mode.
What happens if the robot gets stuck with hair buildup, or paper on the floor? Does it stop automatically? Since we won't be home, I'm afraid the engine will burn out.
Although some of these options are not possible now, is it possible that they will be possible in future updates or will I have to wait for the next model Conga?
I would like it to do the job in one pass although I think it's very good that if it doesn't finish it will continue once it has been loaded again. I don't know if the battery capacity it comes with would be enough for an entire plant. If not, is it possible to add a larger battery? If the battery lasts less with use, can I buy a replacement?
Thank you so much!
Hello, Inhoue, thank you for your visit, we reply:
When programmed, the Conga It always comes out in AUTO mode, currently it cannot be programmed with other cleaning modes or define areas in the programming.
If the robot gets stuck, the central brush will stop rotating and the robot will stop, there is no danger of the motor burning out.
The application is constantly being improved, so it is possible that some of these issues will be incorporated into it, but we do not know for sure that this will be the case.
As for the battery, there is currently no higher power one, although, as we explain in the maintenance section, it is possible to purchase, as with other elements, a spare. On the other hand, the function of automatically resuming cleaning where it ended works very well, so in that sense, you have no problem, it will clean the entire house in any case.
All the best
Thanks for responding so quickly! You are great!
In any case, in the end what you use the most is the AUTO mode, and if I wanted to do some specific cleaning one day I see that you can also start it from outside the home.
If, for example, I have it programmed every day at 9.00:8 a.m., and at 50:9.00 I decide to put it in edge mode, what will happen at XNUMX:XNUMX a.m.? Is the programming cancelled? Will you do it later? What if in the middle of daily cleaning I manually activate it to another mode?
Congratulations on the page, I find it very useful!
Hello Inhoue, thanks to you.
Yes, the advantage is that you can start it from outside whenever you want, in the way you want.
If you have it programmed for a time and start it earlier, it will continue cleaning in that mode and will not activate the schedule. On the other hand, if you do the other way around, it is cleaning automatically, and you manually put it to clean in another mode, it will activate that mode and continue cleaning like that until it receives another order or finishes.
All the best
Good afternoon, I bought the 3090 just a week ago. The first time I used it, it was great, it cleaned the house in two batches, first 47m2 in 74 minutes and the rest in 10 minutes. Now I just put it on and it has only been vacuuming for 3 minutes and it has gone to charge.
This is normal?
Thanks a million for your help. All the best!
Hello, Nora, thank you for visiting our website.
Two things can happen, we believe; or maybe he interpreted that he had a little piece left to clean, and that's what he did (we don't know if you already had the entire house mapped, keep in mind that the first times he navigates the home, he creates the map, and until it is completely built, it does not put it away), or perhaps it was not properly loaded, and it went to be loaded.
It is possible that the behavior in the first days is not perfect in this sense, while getting to know and mapping the house, in principle, it does not seem strange to us; Wait a few more days to see how it goes, when you have had several cleaning cycles and the robot has mapped everything, its behavior will be more impeccable, it becomes intelligent the more it cleans. In any case, if you notice anything else, you can tell us and we will try to analyze what you tell us.
All the best
Good morning. I bought one two days ago Conga 3090. It detects the charging station perfectly, the problem is that when it has a low battery it does not have enough strength to remain perched on the base. It tries three or four times to climb until it finally turns off without having climbed to the base. When it has battery power and I send it to HOME it does go up normally to the base.
I await your recommendations if you can help me
Thank you
Hello Victor, thank you for visiting us.
What we can think of in this case is that you make sure that the charging base does not move when the robot gets on. It happened to us at the beginning, and the robot did not position itself well. In principle, it shouldn't have much of a problem going up, since it returns to the base when it still has 15% battery left. Also check that you have enough space and that you can maneuver without problems.
On the other hand, as generally happens with lithium batteries, it is also possible that it is because in the first days they are not yet at full performance, since these batteries improve in the first charging cycles.
All the best
I bought this device 2 days ago, I don't have Wi-Fi so I make it work through its buttons or remote control, the battery, after always charging, doesn't last more than 20 minutes on high power. My house is 40m and I haven't done the entire thing yet, what is this? Also, what do I do for scrubbing mode without having Wi-Fi? The controller does not have that option!!!!!
Hello, Ana, thank you for your visit.
The battery life depends, logically, on the power used; if it is always used at maximum power, it is less. In any case, it is not necessary that it is always at maximum power, keep in mind that, for example, on carpets, this mode is already activated automatically (even the Turbo mode on carpets can, if desired, be deactivated in the app, in profile-robots-robot settings). This robot, in the minimum power (Eco) already has 1.000 Pascals, at the level or above many robots on the market, and in Normal it reaches 1.400, the same as the maximum power of the rest of the robots. Congas of this range, and above the vast majority of robots on the market.
In any case, lithium batteries gain capacity after the first charging cycles, so it is also normal that the first few days they are not yet at full capacity, and last less than expected.
On the other hand, it is true that, although the robot is manageable using the remote control, there are some functions that cannot be accessed through it, which can only be activated from the app.
All the best
Mine arrived home 3 days ago, and the first time I used it everything went very well. But I moved it so that it is in a clear place and it is no longer there. It doesn't matter where you put the base, you lose the same. I don't know if you can give me any advice since the technical service has not yet contacted me.
Hello, Borja, thank you for visiting us.
Well, it's a strange thing, what we can think of that you can do is press the AUTO button (the central button) for 3 seconds, as if it were to restart the robot (as the manual says in section 3. Before using) , let's see if it relocates the charging base again.
All the best
Hello, I have the conga 3090 three days, and on two occasions it has stopped when the battery ran out and has not gone to its base to charge, I have found it in the middle of the room. Why does this happen, it made the house dizzy on the first use.Thank you
Hello, M. Carmen, thank you for your visit.
In our case, with the Conga 3090 we have not had those types of problems, but we can tell you that it happened to us with another robot, because in the place where we had initially placed the charging base, it was not able to clearly detect it when it was in any area of the house.
This robot (like some others on the market) returns to the base when it still has more than enough battery left (in this case, when it has 15% left), and thanks to the mapping, it knows where it is and where the base is. load, so, in this sense, you should not have problems. Maybe if you change the location, the Conga detect the charging base better and solve the issue.
All the best
Hello. I am thinking of purchasing the conga 3090 series. But…
Are you doing well scrubbing the laminate flooring? Or does it just stop you from mopping? Is synthetic wood flooring recommended for this type of flooring?
Hello, Miguel, thank you for visiting our website.
In the case of the Conga 3090, the dosage it makes is very controlled, it is light; The mop moistens, not soaks, so there should be no problem in the case of varnished floors. If it is not wood, but rather synthetic, there should be no problems either, since they usually have some resistance to humidity, and can even be water-repellent (this can be verified in the specifications of the manufacturer or distributor). In any case, this is a general conclusion, it depends on the porosity of the soil, whether it is well sealed or not.
All the best
Hello. Thank you very much for the page. Your study encouraged us to buy the conga 3090. Now that we have it, I have doubts. Can you only vacuum and mop at the same time if you are at home? Do you have to make sure the battery doesn't run out in case it charges back to the base? Do you have to remove the scrubbing tank for it to charge? Should you pause it, remove the tank and let it return to the base and then be careful to do the same when it is loaded and put the tank back in? And how long does it take to load? It's been flashing orange for an hour or so...I can't wait to put it to work...
Thank you very much.
Hello, Yolanda, thank you for visiting us, and for your words. When loading it, it should not have the scrubbing tank, since humidity could cause a problem. In that sense, it cannot be left alone to simply scrub, to prevent that from happening.
If you are at home, you can go around scrubbing rooms, having the door closed you can prevent it from going to the base.
If you want to put it to scrub around the house, without having to watch for it to return to the base without you realizing it or you won't be there, what occurs to us is that you put the base in a place where it cannot access the robot (on top of a table, for example), and in this way, you avoid problems.
Charging time is 3-4 hours, although the first time it is advisable to charge it longer (leave it overnight). When it is cleaning, but not finished, and returns to base to recharge, the robot may decide to leave early (even if it is not 100%), to finish the job.
All the best
I bought it on Amazon taking advantage of Black Friday for €288,82 and we tried it yesterday for the first time. The truth is that we were pleasantly surprised, although I had seen many videos about the 3090, it was in the field that we saw how well it works, the house was quite clean and the tank was almost completely filled. He scanned the entire house and cleaned very effectively without leaving anything behind, he went under tables, he even cleaned the legs of the chairs, freeing them of lint that gets trapped in those areas, he went through each room twice.
Total in the app, 51m2 cleaned in 84 minutes.
So far we are delighted with the purchase and we have not yet tried the scrubbing accessory that they say is the best.
Hello, Icarus, thank you for stopping by here, and for telling us your impressions.
It's great to have more feedback from users who have already tried it, and who explain how this new one does it. CongaThe truth is that it is surprising, she does the work alone and goes through the entire house without leaving anything behind. When you try scrubbing, I'm sure you'll like it too.
All the best
Hello, I am interested in buying it, but my question is that every night I turn off the router and with it the Wi-Fi and it turns on automatically in the morning. In this case you lose the conga the configuration? I have some smart plugs that in this case automatically reconnect with the router once it has been turned on. Thank you
Hello, Juan, thank you for your visit.
No problem, once the router starts up, the robot will connect to the Wi-Fi again in a little while. If you enter profile-robots, it will put you "offline" while you have not logged in, and "online" when you have already logged in.
All the best
Good afternoon, I am interested in buying a 3090. My question is if I do not want to use the app or WiFi, can I set it to vacuum and mop automatically in each room of the house or is WiFi essential? Does it have buttons to choose what you want it to do or does everything have to be through the app? I have a roomba and I have never even used the remote control, thank you.
Hello, Blanca, thank you for your visit.
On the top of the robot, you have a button to start or pause the robot, and to send it to the charging base, that is, you can operate it like that, just like any other robot. From the remote control, you can also access other functions, such as choosing the power level, programming it, or choosing other common modes, such as edge mode or spiral mode.
However, although you could do all that, without the app you would be losing part of the robot's functionalities, such as the ability to send it to a specific area or restrict areas, or Scrubbing-type scrubbing. In short, it can be handled without the application, but to obtain all the advantages of the robot, it would have to be used.
All the best
Congratulations on your analysis, you have clarified many doubts for me!
I'm thinking of buying a robot and the conga 3090 is one of my final candidates. My biggest fear is that I don't see many user reviews because it is so new. The only place where I see opinions is Amazon and there are many bad ones about the app, although I see that some say that they have fixed it. Is it true that it causes problems or is it something that is already sucked in?
Thank you!
Hello Aniria, thank you for visiting us, and for your kind words.
Most of the complaints there are about the impossibility of connecting it to the Wi-Fi, which must be taken into account that it must be connected to the 2,4 Ghz network and not the 5 Ghz network (they have done this this way because the first has greater reach). Following the brand's explanatory videos (which you can see in this article), there is no problem. In fact, in some cases, once users have seen how these problems are solved and connect the robot to Wi-Fi, they change their opinion positively.
We also explain some other issues now in the article, since we have been adding things as we received questions from readers. For example, some people also value 3090 little because it does not save the map for them. As we explained, it does this when you have toured the house, even more than once, to have all the possible angles, and you can save the map. However, in the robot's configuration, in the application, you can check to save the map, or restart it if desired.
As usual, the app incorporates improvements or makes explanations based on the feedback it receives from users, so that today, we would say that the vast majority of complaints or negative comments that exist are related to issues that have been resolved. .
As with any technological device, we understand that there may be people who do not satisfy it. However, in our experience, not only have we not had any problems with the 3090, but we are very happy, it seems like a great robot.
All the best
Hello, a quick question, in my apartment I don't have much space, it's not very big and I don't have anywhere I can put the charging base with so much space on the sides or in front. It's really necessary???
Hello, Luis, thank you for your visit.
We also respond quickly :-). It is not mandatory, it is a recommendation made by the brand, so that the robot can be placed comfortably on the charging base. But we can tell you that, in our case, we don't have as much space either in front or on the sides, and it does it well anyway.
We have seen that this aspect was not clear in the article, so taking advantage of your question, we proceed to modify it.
Thank you very much and greetings.
Good morning,
I have one Conga 3090 that I use practically every day and my question is, is it correct that when I am not working it is always connected to the charging base even if the battery is at 100%? For example, I usually put it on in the morning and by noon it is finished and it returns to its charging base and is there plugged into the electrical current until the next day when I use it again. I just don't know if it is better to have it permanently connected to the light when it is not working or to plug it in for the time necessary to charge it. Thank you very much and congratulations for the website.
Hello, Ismael, thank you for visiting us, and for your kind words.
In general, robot vacuum cleaner manufacturers recommend that the robot always be connected to its charging base, unless it is not going to be used for a long period of time (in which case, it is even recommended to remove the battery, which in the Conga 3090 can be done easily, as seen in this video https://www.youtube.com/watch?v=vM2QA5W1-ho).
The guidelines would be: If you use it regularly, as is your case, let it be on the charging base (the consumption of a robot, on the other hand, is very low).
If you are going to be away for a few days or without using it, you could leave it anyway.
If you are going to use it for a long time (for example, you are going on vacation for 3-4 weeks), that would be when you would disconnect the battery and store it in the box or in a cool, dry place, also unplugging the charging base from the mains.
All the best
Hello, how can you configure a two-story home in en Conga S3090 and the map is minorized? Thank you so much
Hello, María Antonia, thank you for your visit.
La Conga It saves the map of the last floor that the robot has cleaned, that is, today, there is no possibility of memorizing two different floors. That is an update that will possibly be included in future firmware updates (of the app), but right now, that is how it works.
All the best
Okay, thank you very much for the clarification. So what do you have to do to transfer it from one plant to another. Does it have to be reset? As? Or simply connect it to the other floor and let it go as it pleases? I appreciate your advice and comments. Greetings
Hello, María Antonia, in this case, and waiting for future updates, you would simply have to take it to the other floor and press AUTO mode, and the robot will start cleaning. If at any time, what you want is to memorize the other floor (change the memorized floor), in profile-robots, as we explain in the article, the map could be restarted, so that a new one would be created.
All the best
Hello there!
I have a question about model 3090. If I have two types of floors inside the house, how do I program the scrubbing mode? I have wood laminate in the living room and tile in the kitchen. Therefore, two different cleaning products.
Thank you
Hello, Clara, thank you for visiting our website.
In answer to your question, you should not program the Conga to scrub, since it could damage the charging base if it returned to it and got it wet (apart from that, you would not be able to take advantage of the advantages of the Scrubbing mode, since when it is programmed, it cleans in automatic mode). But, in any case, the biggest problem is the first one we mentioned, which is why we advise against it.
A greeting.
GOOD AFTERNOON, I WANTED TO ASK HOW DOES IT GET UNDER THE FURNITURE? I AM INTERESTED IN A ROBOT THAT IS ABLE TO DO IT, BUT THE CHINESE ONE I HAVE NOW LOOKS LIKE IT ESCAPE, AS SOON AS IT REACHES A FURNITURE AND IT LOOKS LIKE IT'S GOING TO GET UNDER (AND IT FITS! !) DON'T DO IT AND TURN AROUND. I ASSUME THIS ONE WILL DO IT WELL, BUT I WANT TO MAKE SURE. THANKS FOR EVERYTHING, AND VERY INTERESTING ARTICLE
Hello, Lucia, thank you for your visit. Let me tell you, in this sense, that there is no problem, in all the tests carried out it has gotten perfectly under beds, sofas, etc. The only issue you will have to take into account is that there is enough height for the robot to stand in (it is 9,6 centimeters).
All the best
Hello, after fighting with the Wi-Fi configuration, I finally watched the videos and the truth is that once done it was not that difficult, the point was to choose 2,4 and follow the steps correctly. Now my problem is that I can't configure the restricted areas because every time the robot starts cleaning it makes a new map it doesn't save the previous one, I don't know if I'm doing something wrong. Can you help me??
Hello Roy, thank you for stopping by our website.
In order to use restricted areas, the robot must have a map of the home. From there, you can define them. To do this, you have to do a complete cleaning in automatic mode, and from there, you will have the map. If it does not save it, it is possible that in the application settings you do not have the "memorized map" option defined.
To find it, go to profile-Robots, and you will see an image of the robot. Click on the arrow on the right, and you will enter the settings, where you can define settings such as turbo mode on carpets or map memorization.
For greater clarity, in this article in the section where we talk about the app, we will provide a small explanation about the configuration that we have just explained.
However, if you have recently had the robot, keep in mind that, in the first few days, the Conga It is surveying the entire home and mapping the house from different angles, to have a complete perspective and as accurate a map as possible. If this is your case, it is possible that this is why the map has not been saved for you yet.
All the best
Good morning, I wanted to know how long the battery should last because I had it cleaned and it lasted approximately an hour. I don't know if that is good or if it should last longer. Thank you.
Mila
Hi Mila, thanks for visiting us. The battery life is about 110 minutes, but the usage must be taken into account, as is the case with any device with a battery.
La Conga 3090 has 3 power levels, and if you use the Turbo mode more often, in which it uses maximum power, its duration is logically reduced. This can happen, for example, when there are carpets, since it automatically activates it there (if it is marked in the application settings). For example, in the tests we have carried out in rooms with large carpets, where the turbo is activated quite often, the duration has been similar to what you mention.
All the best
Hello, I am interested in buying a robot that scrubs and it is conga I find it very interesting because of what they say about the new system. My question is how many meters or so does the tank hold, because although it is larger than other brands I have been looking at, it doesn't seem too big either. Thanks in advance.
Good afternoon, Soraya, thank you for stopping by.
The tank capacity of the Conga 3090 does not seem too big a priori, in fact, it is smaller than the other models of the brand, which ranges between 300 and 400 milliliters, since they have another scrubbing system. However, the dosing system and the way of scrubbing that this robot has make it very useful, since it moistens in just the right amount, it does not soak or puddle.
The square meters depend a little on the type of floor and the shape of the room and the obstacles there may be, but we can tell you, as an example, that in the tests carried out, it scrubbed 15-20 square meters without running out. deposit, so we consider that it has good autonomy in this sense, in relation to other alternatives.
All the best
Hello, I bought the 3090 a week ago and I am very happy with it. I have a doubt, and it is that I understood that the robot turned to maximum power when it went over a carpet and that it was noticeable that it was going slower (I think I saw it in a video) but I don't notice that it does that. It is normal? The truth is that it sucks great but I don't know if it's doing that.
Thank you
Hello Irina, thank you for visiting us.
In the app, if you enter profile-robots, and click on the arrow that puts you to the right, in the image of the robot, you arrive at a screen called robot settings. There you can configure various options, including turbo mode on carpets.
All the best