Conga 7090 AI, artificial intelligence for the best result

Cecotec has placed its robot vacuum cleaners at the forefront of technology, and with the new Conga 7090 AI hits the table again, with an ultra-powerful robot with Artificial Intelligence to achieve the best result.

View deals Conga 7090

See price pack 2 units

	Conga 7090 A.I
Navigation technology	iTech LaserCyclone
Autonomy (min)	240
Noise (decibels)	<64
Diameter (cm)	35,5
Height (cm)	9,7
Programmable	Yes
High efficiency filter	Yes
Dry/wet deposits (ml.)	570 / 270
Power levels	3 + ultrapower
Suction power (Pa)	10.000
Cleaning modes	10
Assessment	99

La brand Conga by Cecotec It has led the robot vacuum cleaner market in Spain for years. Among its values is the democratization of access to technology, offering products with good features at reasonable prices.

In recent times, the company has evolved and revolutionized the market, with a new range of ultra-powerful robots that multiply by four or five the suction power of some of the most powerful high-end devices from other brands.

The presentation of the Conga 6090 Ultra supposed one more step in performance; Thanks to its powerful processing and improved software, the robot is capable of offering the best cleaning for your home.

Now la Conga 7090 AI is one step above, thanks to artificial intelligence (AI). The new robot from the Spanish company shares some qualities with its predecessors, but adds interesting improvements that make it an intelligent device.

Do you want to know more details about this super robot? We tell you about them below in this in-depth analysis.

Now the Conga 7090 can also be purchased with a self-emptying base! Additionally, you can take a look at the Conga 9090, new robot with artificial intelligence of the brand, also with the possibility of automatic emptying (if you want to know more details, you can visit our review):

See price Conga 7090 with self-emptying

See price Conga 9090

See price Conga 9090 with self-emptying

See analysis

Conga 7090 AI: our assessment

La Conga 7090 AI has obtained a rating of 99 points out of 100. It is a device with the elegant and robust design of other models of the brand, but with a more technological aspect, due to the inclusion of the double camera, which gives it a modern appearance, like a robot from the future.

Its Cy-Clean cyclonic technology allows it to reach the 10.000 Pascals of suction power, and its powerful hardware processes a huge amount of data at high speed, to achieve the smartest navigation, which also constantly improves, with each cleaning.

As usual, it is a multifunction robot with a advanced scrubbing system, room mapping, room cleaning and a wide variety of functions, and its various brushes achieve the best cleaning on any type of surface.

Box contents

A Cecotec robot vacuum cleaner Conga 7090 AI.
A multifunction brush, made of bristles and silicone.
A rubber brush, especially for pets.
A Jalisco brush.
Solids deposit with cyclone.
Mixed tank (solids/liquids).
2 mops (1+1 spare).
2 side brushes (1+1 spare).
2 high efficiency filter (one for each tank).
A remote.
Charging base and power adapter.
Self-cleaning tool.
An instruction manual and an app manual.

Conga 7090 vs Conga 6090

La Conga 6090 is a robot that also provides a higher degree of intelligence than other devices, since it can propose the user the ideal cleaning plans for each room.

For its part, the Conga 7090 A.I It is a more advanced model, with the inclusion of artificial intelligence, allowing you to make the best decisions, especially in complex environments.

In the power section, both are positioned as the reference of the market, with its 10.000 Pascals.

They also agree on other aspects, such as the size, the tank, the autonomy of the device or even the optimization of the battery, with Total Surface 3.0.

Both robots map with great accuracy and can save multiple maps, clean by room through cleaning plans and have various cleaning modes.

See price Conga 6090

See analysis

The fundamental difference lies in the inclusion of 3Diana artificial intelligence, which allows the Conga 7090 detect and recognize objects, to make increasingly intelligent decisions, similar to what a person would make.

Recognize objects

Start up

As usual, The robot comes partially charged, although it is advisable to charge it completely before using it for the first time, carrying out a long-term charge (for example, leaving it overnight). Subsequently, it will take between 3 and 4 hours for a full charge.

The base will be located preferably in a place where the robot has room to move, although this is not strictly necessary, given the great precision with which it moves and its advanced technology.

The robot can be controlled using the button on the top, through voice commands, using the remote control or using the app, although It is through the application that we will get the most out of this high-end model.

As usual, installing and configuring the app and the robot's Wi-Fi connection is a simple and intuitive process, and the application itself guides us step by step. To facilitate connectivity, the Conga 7090 is compatible with 2,4 and 5 GHz Wi-Fi networks.

Operation via the app also has the advantage that We can control the robot whenever we want and from wherever we are: from the street, at work, in a cafeteria...

Conga 7090 AI, artificial intelligence for the best result

Operation of the Conga 7090 A.I

La Conga 7090 AI is a very complete robot, which It has excellent performance in each and every one of its sections..

Navigation system

The Cecotec 7090 navigation system is based on iTech LaserCyclone technology, which combines an LDS laser sensor with an optical sensor to achieve the most accurate navigation. The laser is a technology that allows very high precision (and that is why it is used in sectors such as aeronautics, engineering or medicine), thanks to which the robot follows a precise and orderly route, cleaning with great efficiency and without leaving any corner uncleaned.

Advanced scanning technology

The system is even more precise thanks to the inclusion of the RGB camera and its three-dimensional sensor network, which ensure your accuracy and help you react quickly to unexpected obstacles.

The first time it cleans, the robot builds a map of the house in real time, what we can see in the application. When finished, we can save it (we can have several maps saved), edit it if we have something to modify and name the rooms; This information can then be used when creating cleaning plans.

Thanks to its advanced sensor system (laser, optical, camera, TOF...) and the latest generation software that includes, The robot not only maps and proposes the rooms, but also detects the type of floor in each one. To achieve the best result in this section, it is important that the first mapping is done in good lighting conditions. So, after will be able to suggest the most appropriate cleaning mode for each room.

The design of its wheels and suspension allows it overcome obstacles with great skill, exceeding heights of up to 2 centimeters, so rugs of a certain thickness are not a problem.

Thanks to its 3Diana artificial intelligence, the robot will mark the carpets on the map and activate the Turbo when it is vacuuming on them, or will avoid getting on them when it is mopping.

Cyclonic ultrapower

The new generation of robots Conga They are characterized by their ultrapower, but the cyclones, as is the protagonist of this analysis, play in another league.

Thanks to its powerful digital engine and Cy-Clean technology, la Conga 7090 AI reaches 10.000 Pa of power, an extraordinary suction capacity that allows it to do magnificent work on all types of surfaces, capturing dirt where other robots are not capable, when it is embedded between the joints of the floor or between the hairs of the carpets.

In addition, Its new generation digital motor is quieter, so despite its high power, it allows you to keep the noise level at very reasonable levels.

In addition, thanks to Turbo Clean Carpet technology activates Turbo when it detects that it is on a carpet, to achieve the best result.

The robot It has three power levels selectable by the user (Eco-Normal-Turbo) and in addition, the suction can be deactivated (if you only want to scrub, for example). Ultra Power mode is activated by the robot in spiral mode, or in Spot mode, to achieve the deepest cleaning in a specific area.

Autonomy

Thanks to its huge lithium battery, the Conga 7090 It has a very wide autonomy, up to 4 hours, enough to clean large rooms, especially considering that it cleans very quickly, thanks to its advanced navigation system.

In any case, the robot has Total Surface 3.0 technology, so If it did not finish cleaning, it would return to the base and once it had loaded what was necessary to finish, it would resume cleaning exactly where it had left off..

As a curiosity, when the cleaning is finished and when it is reaching the base, la Conga 7090 incorporates a new movement, Final Cleaning, to prevent dust from reaching the charging base on the brush. Ingenious and practical.

Brushes

La Conga 7090 comes with 3 brushes, offering great versatility, which allows you to choose the most appropriate in each situation:

The classic multifunction bristle and silicone brush It is suitable for all types of surfaces, especially for carpets, where its studied shape helps to remove dirt trapped between the hairs.
El BestFriend Care rubber brush has an anti-tangle design, so it is ideal if there are pets and/or a lot of hair in your home.
The innovative Jalisco microfiber brush It achieves much higher efficiency in cleaning hard floors, thanks to its millions of microfibers that allow it to very effectively trap all types of dirt, especially fine dust, which cannot be seen with the naked eye.

Jalisco brush

Room Plan 3.0, the most comfortable smart cleaning

La Conga 7090 AI shares with the Conga 6090 Room Plan 3.0 technology, which allows the robot to propose cleaning patterns depending on the type of floor and the room.

Now with the cleaning plans You can select not only the rooms to be cleaned, but also the order in which it will be done. In each room you can define a different type of cleaning; For example, clean the room in Auto mode and Turbo power, and clean the hallway in edge mode and normal power.

To change the cleaning order proposed by the robot, you have to click on the three lines in the upper right part of the room that we want to move (the ones we marked in the image), and drag it to the desired position.

Selecting the order of the rooms

Cleaning plans can also be scheduled, for added convenience, choosing the days of the week and the hours we want them to run, thanks to All-TimeTable technology. Scheduling is done on the same plan configuration screen, without having to exit (that is, plans can be scheduled to run whenever we want, or not).

And thanks to Room Assist technology, it not only detects the rooms in the house, but also It also identifies the type of floor, to configure the ideal cleaning parameters in each case..

Logically, we can modify the type of floor according to our criteria, in 4 options (smooth, tile, wood or carpet), and in the app it will be shown with a different background, to easily identify it. We can also change the cleaning parameters for each room to our liking.

La Conga 7090 allows you to save up to 10 maps (so there is no problem if your home has several floors or you want to use it to clean several houses), and 10 different cleaning plans for each map (that is, 100 plans in total), so you can always have cleaning configured to your liking in every place.

Once we have a map, If we want to create a new one, we go to maps and click +. It will ask us if the new map belongs to the same house or a different one. Afterwards, it will ask us to locate the base on that new plant, to start the cleaning from there. When you finish mapping, you will simply have to do as in the first map, editing it to your liking.

3Diana Artificial Intelligence

The Cecotec R&D team has put all its efforts with the inclusion of 3Diana Artificial Intelligence technology in this robot. To handle the large amount of data, the robot equips a dual Quad Core processor with TrustZone technology, which allows you to make decisions very quickly based on the data collected.

The robot increasingly makes smarter decisions, since it processes millions of images, so it continually learns.

Extensive database

Its camera captures images of the environment and compares them with the database of objects it has in milliseconds. Each new system update improves the 3Diana database, incorporating new images and functionalities.

Thus, the robot is capable of identifying and avoiding objects such as chairs, shoes, socks, cables or even excrement.

Avoid objects

It is also very interesting if we have pets, since The PetProtect system detects dogs and cats, generating a protection area around them and reducing the noise of the robot so as not to disturb them.

Of course, system privacy is assured, since the information captured by the Conga 7090 AI is processed and deleted instantly.

Communication through the app

Another novelty that incorporates the Conga 7090 AI is the communication through the app. The new app, in addition to allowing us to see the robot's work, suggest accessories or propose cleaning plans, has a much friendlier interface and can also send us notifications.

For example, thanks to Messy Room technology, If it detects a lot of clutter in a room (more than 5 objects), it will send us a notification through the app, so we can solve it and it will continue cleaning while skillfully avoiding obstacles. The various notifications that the robot can send can be activated or deactivated in the settings.

Advanced scrubbing for a more thorough clean

As is the house brand, Cecotec Conga 7090 It is a 4-in-1 multifunction robot, capable of vacuuming, sweeping, mopping and scrubbing, and doing all four things at the same time.. In this way, we can achieve a more complete cleaning of the home with a single device.

If you wish, you can only mop without vacuuming at the same time, activating the mopping mode and deactivating the vacuum power in the power level settings.

The use of the mop can be interesting even for dry cleaning, since its dual-material microfiber helps trap stuck-on dirt; If you moisten it slightly with a specific spray, your wooden floor will shine like never before.

La Conga 7090 It has an advanced scrubbing system. Thanks to Scrubbing technology, the robot makes a back-and-forth movement, similar to what people do when scrubbing, achieving a better result than robots that simply pass the wet mop as they go.

In addition, has intelligent water dosing, thanks to Wash4You technology, so you can choose 3 water flow levels: Low, for light scrubbing; Medium, for daily scrubbing; and High, when cleaning needs are greater.

With the water tank you can overcome 1 centimeter obstacles (instead of the 2 without it) and avoid climbing on the carpets to avoid getting them wet.

Cleaning modes

La Conga 7090 is a highly configurable robot, since in addition to its 3 power levels and 3 scrubbing levels, it has 10 cleaning modes:

Auto mode: This is the mode used by default; In it, the robot will go through all the rooms (or those indicated by the selected cleaning plan), going through them completely, until finishing, starting at the edges and then completing the interior. If it doesn't finish, it returns to the base and once charged, resumes cleaning exactly where it left off.
Edges: A common mode in many robots, in which it advances close to the walls, to capture dirt that tends to accumulate on edges and corners.
Spiral: Another classic mode; When activated, the robot will begin to make increasingly larger spirals around that point. It is useful if we have dropped something and it has spread. In this mode, Ultrapower is activated, reaching 10.000 Pa.
Manual: If desired control the robot manually, as if it were a remote-controlled car, which is perfect for not transporting the robot by hand, avoiding carrying it and causing it to become disoriented with respect to the map.
Returning home: The robot returns home when cleaning is finished or when it needs to be charged, but if we want send the robot to the charging base manually, we can use this mode.
Twice: If we want to make a even deeper cleaning, marking Twice the robot will make more than one pass.
Scrubbing: Cecotec's advanced scrubbing technology, thanks to which the robot makes a back and forth movement, back and forth in a similar way to what people do when scrubbing, to achieve a better result.
Spot Mode: If we want clean a small area, about 2x2 meters, for example, under a table. In this mode it also activates Ultrapower.
Restricted area: We can establish restricted areas on the map, to which the robot will not access, such as the children's playroom, the pet's food area, or a rug when you are scrubbing.
Smart area: To clean one or several rooms, as you prefer.

Advantages of Conga 7090 A.I

It is a Conga

The brand has become the market reference, thanks to its high-performance robots loaded with technology, and the new 7090 is the best example of this.